Did a little more tuning and ran 14.36@95 60' 2.21. The 5.7 is just as slow off the line as the 5.3 was. The new coverter should really drop the 60'. This run had about 10 gallons more gas than the 14.41 I ran last week. The air was better, but I still think that the tuning made some difference. Next week converter, and next month headers and exhaust.

 

what kind of 60 fts are you getting and what have you done to tune? i have my motor and i just need to throw it in

marc

 

I have a Midwest 3000 that I will install this week.

 

What converter are you getting? If it hooks with the conveter it should take you to a 1.8x 60ft.
I think my best 60ft on the motor is 1.86@8.44 in the 1/8.
Is you 5.7 stock?

 

Should have time this week to install it. I did run a 14.30 @95 last wed, so I am hoping for high 13's with the converter and good air.

 

So, is it in? I am anxious to hear if yours works as good as mine does. My best 60ft since the Midwest conv. is 1.86 and that is with 0 timing at the launch and on the stock tires.