Can anyone tell me the tq specs on the 04 short head bolts for a 5.3?

i think it is 90* then 50* any help is appreciated.

-Ryan

 

1st design

Cylinder Head Bolts - First Design - First Pass all M11 Bolts in Sequence 30 Nm (22 ft. lbs.)
Cylinder Head Bolts - First Design - Second Pass all M11 Bolts in Sequence 90 degrees
Cylinder Head Bolts - First Design - Final Pass all M11 Bolts in Sequence - Excluding the Medium Length Bolts at the Front and Rear of each Cylinder Head 90 degrees
Cylinder Head Bolts - First Design - Final Pass M11 Medium Length Bolts at the Front and Rear of each Cylinder Head


2nd design

Cylinder Head Bolts - Second Design - First Pass all M11 Bolts in Sequence 30 Nm (22 ft. lbs.)
Cylinder Head Bolts - Second Design - Second Pass all M11 Bolts in Sequence 90 degrees
Cylinder Head Bolts - Second Design - Final Pass all M11 Bolts in Sequence 70 degrees
Cylinder Head Bolts - M8 Inner Bolts in Sequence 30 Nm (22 ft. lbs.)

 

Thank you Sir.