Anyone rebuilt a 5.3?
Mar 27, 2005 | 09:26 AM
#41
Banned
iTrader: (4)
Joined: Oct 2003
Posts: 5,151
Likes: 1
From: From Houma La. Living n Ellisville Miss.
Originally Posted by goshawk23
randy, you have to consider tuning and how high the shifts are set at for et reduction. we all know a mail order tune isn't gonna yeild the numbers you can get off a dyno. let alone, tuning at the track for some gains. i also think most mail order tunes are off the shelf so to speak with a few adjustments here and there. the truck is being shifted pretty low (6200 or 6300). hell, i am shifting my truck a few hundred rpms lower than that. so don't let the 12.50 fool you. i think he could drop a few tenths if he would raise that shift point to at least 6500/6600. i know you shift way up there. so we know it will hold it. what are the et diffs between you shifting at 6200 vice 6700 or 6800 rpms. i will say at least a few tenths.
now on to 5.3's sucking. i disagree wholeheartedly on that one. it may end up being cheaper to find a used 6.0 rather than build a 5.3L but i am impressed with 5.3's in bigkids truck and randy's truck and the others that are ******* the **** out of s/c or turbo trucks.....via n/a or with nitrous..
now on to 5.3's sucking. i disagree wholeheartedly on that one. it may end up being cheaper to find a used 6.0 rather than build a 5.3L but i am impressed with 5.3's in bigkids truck and randy's truck and the others that are ******* the **** out of s/c or turbo trucks.....via n/a or with nitrous..
Mar 27, 2005 | 09:30 AM
#42
Banned
iTrader: (4)
Joined: Oct 2003
Posts: 5,151
Likes: 1
From: From Houma La. Living n Ellisville Miss.
Originally Posted by crows_camaro
To the original poster.....
I understand your desire for a rebuild, but I've got to say if their is anyway possible then save up just a little more and do the 6.0 swap. I believe you would be extremely happy with the possibilities it opens up.
Randy Grabert
12.59 @104.76 1.64 60'
Must be all thoughs E-fans giving you all that extra power and lower times.
j/k
I say lets end the debate of what OTHER people's trucks should be running because you can never know their situations. They may be concerned about reliability, life of engine, or money. You never know.
All I gotta say is Line it up with Dirty Silver in Hatty I'm sure if you name a Sunday he'll be on the line waiting on you to show. But for some reason I think he will be waiting on you too show for a long long time, but I hope not because I think that yall two would be a very good race. Also that way maybe we all can get ahold of the guys you talk about and maybe find out what they do diferently.
BTW we need to make sure we get a VID of that race
I understand your desire for a rebuild, but I've got to say if their is anyway possible then save up just a little more and do the 6.0 swap. I believe you would be extremely happy with the possibilities it opens up.
Randy Grabert
12.59 @104.76 1.64 60'
Must be all thoughs E-fans giving you all that extra power and lower times.
j/kI say lets end the debate of what OTHER people's trucks should be running because you can never know their situations. They may be concerned about reliability, life of engine, or money. You never know.
All I gotta say is Line it up with Dirty Silver in Hatty I'm sure if you name a Sunday he'll be on the line waiting on you to show. But for some reason I think he will be waiting on you too show for a long long time, but I hope not because I think that yall two would be a very good race. Also that way maybe we all can get ahold of the guys you talk about and maybe find out what they do diferently.
BTW we need to make sure we get a VID of that race
guys @ work are makeing plans to go in 3 sundays i we let you'll know just like i did the last time.
Mar 27, 2005 | 09:42 AM
#43
Teching In
Joined: Mar 2005
Posts: 1
Likes: 0
Just need to clear a few things up. i have the rcsb with the 6.0 that randy is talking about. i went last wed. night to gulfport and ran a 12.74 @ 105.8 1.85 60ft. the truck has a custom tune for a 5.3 not a stock tune and i let the truck shift on its own 6400 rpm not 6k. the truck also has 3.73 gears.
mods are as follows lq9 with stock heads (no port work and have not been shaved) comp 222/224 cam, 918's, LT's, undrive pulley, elec fans, TB convertor, cut outs, ported TB.
mods are as follows lq9 with stock heads (no port work and have not been shaved) comp 222/224 cam, 918's, LT's, undrive pulley, elec fans, TB convertor, cut outs, ported TB.
Mar 27, 2005 | 01:18 PM
#45
Looks to be a good meet if we all can meet up on the same Sunday. I'm going to call Allen Monday and get him to send me a pcm with a higher shift point(maybe around 6500, but I'll get his opinion on that.) I also need to talk to TnTrk53 about logging a run or two so I can get a file to send to Allen and show him what's going on down the track. He might could send me alittle warmer tune. I'm planning on using my vacation time to drive down to Allens place and get a dyno tune, then hitting npr on my way home. I hope all of this gets done before my nitrous gets put on, because I do want a better time on motor first.
Mar 27, 2005 | 11:37 PM
#47
TECH Regular
Joined: Nov 2002
Posts: 495
Likes: 0
From: Los Angeles
Back to the original topic:
I had my 5.3 rebuilt after I blew the #7 piston from running lean on 10 pounds of boost. I decided to rebuild instead of upgrading to a 6.0 for several reasons. First, I live in Cali an I was afraid of smog regulations. Second, I figured I could rebuild the 5.3 with forged parts so I could build it for boost instead of worry about blowing a brand new 6.0.
I had my 5.3 rebuilt after I blew the #7 piston from running lean on 10 pounds of boost. I decided to rebuild instead of upgrading to a 6.0 for several reasons. First, I live in Cali an I was afraid of smog regulations. Second, I figured I could rebuild the 5.3 with forged parts so I could build it for boost instead of worry about blowing a brand new 6.0.
Thread
Thread Starter
Forum
Replies
Last Post
