anyone ever ran this lunati cam... questions i need answered
Dec 21, 2011 | 09:46 PM
#1
Thread Starter
Joined: Jun 2010
Posts: 503
Likes: 2
From: donaldsonville,la
anyone ever ran this lunati cam... questions i need answered
Hydraulic roller, fair idle. Good all out street performance or mild race cam. Valve train modifications necessary (valve springs).
Advertised Duration (Int/Exh): 283/283
Duration @ .050 (Int/Exh): 221/221
Gross Valve Lift (Int/Exh): .558/.558
LSA/ICL: 114/110
Valve Lash (Int/Exh): Hyd/Hyd
RPM Range: 2500-6000
Includes: Cam Only
would shorter push rods be need if put into a 5.3? or any other mods would be needed to make this cam perform in the 5.3
Advertised Duration (Int/Exh): 283/283
Duration @ .050 (Int/Exh): 221/221
Gross Valve Lift (Int/Exh): .558/.558
LSA/ICL: 114/110
Valve Lash (Int/Exh): Hyd/Hyd
RPM Range: 2500-6000
Includes: Cam Only
would shorter push rods be need if put into a 5.3? or any other mods would be needed to make this cam perform in the 5.3
Thread
Thread Starter
Forum
Replies
Last Post
thewrx
Cars and Motorcycle Classifieds
1
Aug 12, 2015 08:28 PM
