American Racing Headers!
#1
Truck Premium Sponsor
Thread Starter
American Racing Headers!
Hello everyone,
We wanted to drop in and see if we could help any of you out with exhaust systems for your GM Trucks.
https://americanracingheaders.com/collections/silverado
https://americanracingheaders.com/collections/gm-truck
https://americanracingheaders.com/co...mc-trailblazer
Please let us know if we can assist!
John
We wanted to drop in and see if we could help any of you out with exhaust systems for your GM Trucks.
https://americanracingheaders.com/collections/silverado
https://americanracingheaders.com/collections/gm-truck
https://americanracingheaders.com/co...mc-trailblazer
Please let us know if we can assist!
John
#7
TECH Addict
iTrader: (7)
Hello everyone,
We wanted to drop in and see if we could help any of you out with exhaust systems for your GM Trucks.
https://americanracingheaders.com/collections/silverado
https://americanracingheaders.com/collections/gm-truck
https://americanracingheaders.com/co...mc-trailblazer
Please let us know if we can assist!
John
We wanted to drop in and see if we could help any of you out with exhaust systems for your GM Trucks.
https://americanracingheaders.com/collections/silverado
https://americanracingheaders.com/collections/gm-truck
https://americanracingheaders.com/co...mc-trailblazer
Please let us know if we can assist!
John
1 3/4 with 3.5in ypipe.
Trending Topics
#10
Truck Premium Sponsor
Thread Starter
Update
Hey Guys,
we we have a few systems on our website for the various engines, primary configurations and cat options. You can see them by clicking
www.americanracingheaders.com
as for 2” system, we CAN but the better question is why is it needed?
If you’re not already making over 1000whp and over 15 psi of boost it won’t help one bit. LMR just built an 8 second C7 with our 1-7/8” header.
The 2” will need quite a bit of work to the engine bay to fit properly.
we we have a few systems on our website for the various engines, primary configurations and cat options. You can see them by clicking
www.americanracingheaders.com
as for 2” system, we CAN but the better question is why is it needed?
If you’re not already making over 1000whp and over 15 psi of boost it won’t help one bit. LMR just built an 8 second C7 with our 1-7/8” header.
The 2” will need quite a bit of work to the engine bay to fit properly.