Anyone work out the brackets for an aftermarket fuel rail setup on a L92 Truck Intake yet?

I have a set of L92 heads I want to try out on a built 408 with a YSi blower and a little help from the bottle....

I see that FAST just brought out the 102mm for the L92 and Weiand is still dragging ***, so I want to move forward with the truck intake before I shell out a grand for the FAST setup....

 

I have a set of the L92 truck fuel rails, They are the oem ones.

 

where did you get that bumper cover in your sig?? I want it!!!

 

I have the oem rails and injectors. I need to build up a set of dual rails and the bracket standoffs on the truck intake are in an akward position. Before I reinvented the wheel, I wanted to see if there were any off the shelf options...

I want to build out the truck intake I have before that FAST 102mm does anymore talking to my wallet....

as far as the bumper cover, I am sure Keystone will be glad to take your money.....

http://www.keystonerestyling.com/cgi...hevrolet%2FGMC

 

For those that come after me and see this thread, Nate @ Nasty Performance just confirmed his rails will fit the L92 Truck intake...

http://www.nastyperformance.com/FuelSystem.html

Git R Done....