98 xcsb
#1
TECH Apprentice
Thread Starter
iTrader: (2)
Join Date: Oct 2006
Location: odessa tx
Posts: 369
Likes: 0
Received 0 Likes
on
0 Posts
98 xcsb
My friend is looking for some type of particular items like a cam kit or maybe a upgraded ignition for the truck and some full legnth headers for the truck and is willing to spend some money for the parts cuz hes tired of not having any power. Just something to start him out with so he can be satisfied that he can make a little power and torque. Any sugestions please.
#3
On The Tree
Join Date: Jul 2006
Location: Bakersfield, CA
Posts: 164
Likes: 0
Received 0 Likes
on
0 Posts
He does not have a tbi.
Assuming he has the Vortec 350, tell him to start off with some headers like Thorley and then a custom exhaust to follow.
After that go ahead and get a custom tune. Try Nelson, Wheatley, Westers, Black Bear Performance, etc as all of these are reputable tuners.
What gears does he have? If 3.42 or even 3.73, try some 4.10s with an Limited slip added in. I am pretty happy with my Auburn ECTED.
Still not happy with the truck? Then try a higher stall torque converter like a 3000 unless he tows then go with something like a 2600. Next up would be a cam, vavlesprings, locks and retainers, and pushrods.
If he gets all of these or even up to the cam then you can come back.
Assuming he has the Vortec 350, tell him to start off with some headers like Thorley and then a custom exhaust to follow.
After that go ahead and get a custom tune. Try Nelson, Wheatley, Westers, Black Bear Performance, etc as all of these are reputable tuners.
What gears does he have? If 3.42 or even 3.73, try some 4.10s with an Limited slip added in. I am pretty happy with my Auburn ECTED.
Still not happy with the truck? Then try a higher stall torque converter like a 3000 unless he tows then go with something like a 2600. Next up would be a cam, vavlesprings, locks and retainers, and pushrods.
If he gets all of these or even up to the cam then you can come back.
Thread
Thread Starter
Forum
Replies
Last Post