03' ECSB 5.3 Cam question
Oct 26, 2011 | 09:42 PM
#11
Thread Starter
Banned
Joined: Feb 2008
Posts: 14
Likes: 0
Blackcash has a point, i've seen more WHAT CAM threads than usual...
Just find something that doesnt have huge numbers and has an lsa around 110 or 112 and it should be around what you want. Definitely talk to a sponsor about what they recommended for exactly what you want to do...
And yes, don't waste time or money on shorties, go straight to LTS
Just find something that doesnt have huge numbers and has an lsa around 110 or 112 and it should be around what you want. Definitely talk to a sponsor about what they recommended for exactly what you want to do...
And yes, don't waste time or money on shorties, go straight to LTS
Oct 27, 2011 | 01:22 AM
#14
The comment about the 110/112 lsa was nearly word-for-word what I planned on telling you after reading the original post, but I was just beat to the chase. Anyways, I think everyone has you handled. Pacesetter lt's w/ y, should make for a nice setup with a smaller cam and yellow ls6 springs. Nothing outrageous with huge duration/lift, but with no plans for a stall, that's a no brainer.
Also, I think blackcash had just been frustrated with all of the cam threads and it had built up. I've noticed them a lot lately too, but I do understand where you are coming from. Just don't take anything like that personal--especially not to the point where you have to put it in your sig. Just my .02, because I know how hard it is to get any reputation at all as a new member, even with knowledge. So just don't make it harder on yourself, man. Best of luck with the project. Keep us updated.
Also, I think blackcash had just been frustrated with all of the cam threads and it had built up. I've noticed them a lot lately too, but I do understand where you are coming from. Just don't take anything like that personal--especially not to the point where you have to put it in your sig. Just my .02, because I know how hard it is to get any reputation at all as a new member, even with knowledge. So just don't make it harder on yourself, man. Best of luck with the project. Keep us updated.
Oct 27, 2011 | 10:57 AM
#15
In stock ready to ship. Call or PM if you need any assistance.
Oct 27, 2011 | 01:04 PM
#16
Thread Starter
Banned
Joined: Feb 2008
Posts: 14
Likes: 0
The comment about the 110/112 lsa was nearly word-for-word what I planned on telling you after reading the original post, but I was just beat to the chase. Anyways, I think everyone has you handled. Pacesetter lt's w/ y, should make for a nice setup with a smaller cam and yellow ls6 springs. Nothing outrageous with huge duration/lift, but with no plans for a stall, that's a no brainer.
Also, I think blackcash had just been frustrated with all of the cam threads and it had built up. I've noticed them a lot lately too, but I do understand where you are coming from. Just don't take anything like that personal--especially not to the point where you have to put it in your sig. Just my .02, because I know how hard it is to get any reputation at all as a new member, even with knowledge. So just don't make it harder on yourself, man. Best of luck with the project. Keep us updated.
Also, I think blackcash had just been frustrated with all of the cam threads and it had built up. I've noticed them a lot lately too, but I do understand where you are coming from. Just don't take anything like that personal--especially not to the point where you have to put it in your sig. Just my .02, because I know how hard it is to get any reputation at all as a new member, even with knowledge. So just don't make it harder on yourself, man. Best of luck with the project. Keep us updated.
thank you sir.
on a lighter note. pretty sure im getting banned...i sent AKlowriderZ71 a nasty response in light of him giving me 10 infraction points like i was in middle school again.
but thanks to all that helped. especially BLACKCASH
Last edited by AKlowriderZ71; Oct 27, 2011 at 03:26 PM. Reason: doesn't know when to quit...
Thread
Thread Starter
Forum
Replies
Last Post
