walk me thru a tru trac install
Dec 7, 2010 | 12:44 AM
#11
Carrier can just be snugged up, driveshaft needs to be out of the way so you can rotated the pinion when needed. Just take the straps off of the U joint and tie the shaft up out of the way from the crossmember. I usually use a short strap or some rope.
You can look at my thread or AxisT6's thread and there are pics for setting up the dial indicator to measure BL.
Oh yeah, Axles out.
You can look at my thread or AxisT6's thread and there are pics for setting up the dial indicator to measure BL.
Oh yeah, Axles out.
Dec 7, 2010 | 12:55 AM
#12
Carrier can just be snugged up, driveshaft needs to be out of the way so you can rotated the pinion when needed. Just take the straps off of the U joint and tie the shaft up out of the way from the crossmember. I usually use a short strap or some rope.
You can look at my thread or AxisT6's thread and there are pics for setting up the dial indicator to measure BL.
Oh yeah, Axles out.
You can look at my thread or AxisT6's thread and there are pics for setting up the dial indicator to measure BL.
Oh yeah, Axles out.
Thread
Thread Starter
Forum
Replies
Last Post
echoman
GMT 800 & Older GM General Discussion
2
Aug 22, 2015 01:53 PM
slowlsx
GM Parts Classifieds
2
Aug 10, 2015 05:33 PM
