Verter Ordered
#1
Thread Starter
TECH Senior Member
iTrader: (7)
Joined: Jun 2004
Posts: 5,446
Likes: 7
From: Central Kentucky
Put in the call to Precision Industries today. Vigilante 2600 with my name on it should roll out by weeks end.
Gonna have to research the install now. Anybody know the converter bolt thread and length, from the other thread going I may need them. Now I'm worried about keeping it in place while putting the trans back in.
Gonna have to research the install now. Anybody know the converter bolt thread and length, from the other thread going I may need them. Now I'm worried about keeping it in place while putting the trans back in.
#3
Thread Starter
TECH Senior Member
iTrader: (7)
Joined: Jun 2004
Posts: 5,446
Likes: 7
From: Central Kentucky
Originally Posted by Naked AV
Congrats!
You're gonna wish you had gone with more cam now....
You're gonna wish you had gone with more cam now....

#4
Originally Posted by KySilverado
Had to make up for the drag of my speed sensor. 

My guess is you'll end up with a 210/218 or 212/218 with that stall...which would rock..
.. You're right, though, the spring/retainer/lock part is something you (thankfully) won't have to deal with this next time.
#7
Or in the backseat for that matter(more room)
Congratulations on the stall it isnt difficult to install just time consuming the stall isnt going to just fall out unless you tilt it far forward. Get one person on ech side witha jack under it and have one person hold their hand on the verter and guide it up onto the guide pins on the block and bolt her up have fun putting the verter bolts in they were a pain cause you have to reach through where the starter is.
Trending Topics
#9
Originally Posted by KySilverado
I'm really not wanting to put anything pink in my truck. Is that so wrong
Called PI today, it comes with bolts.
Called PI today, it comes with bolts.

#10
Thread Starter
TECH Senior Member
iTrader: (7)
Joined: Jun 2004
Posts: 5,446
Likes: 7
From: Central Kentucky
Originally Posted by gamedawgx53
what size is it?
Multi- Disc 3 plate
2400-6000 RPM's
A conservative 2600 Stall. But Damn IT IS PINK!
Most I have ever paid for anything PINK!


