THE Tru-Cool 40K GVW Transmission Cooler Install Thread
#204
Custm2500's Rude Friend
iTrader: (17)
#205
Praise The Lowered
iTrader: (17)
Another thing I forgot to mention...I got some slick Alum o-ring style compression fittings for tying in to the hardlines, worked 10x better than any brass/homedepot fitting.
Also I unbolted the oem horizontal angle brace and flipped it to allow a flat mounting surface. This allowed me to lower the Trucool, and line up both mounting holes..I will take some pics to show...
Also I unbolted the oem horizontal angle brace and flipped it to allow a flat mounting surface. This allowed me to lower the Trucool, and line up both mounting holes..I will take some pics to show...
#206
MASS seller approved
iTrader: (50)
For everyone looking for the EAD/Tru Cool Max install brackets, please see this thread: https://www.performancetrucks.net/fo...rdware-508374/
The brackets have been approved for sale in the member made section!
The brackets have been approved for sale in the member made section!
#209
TECH Enthusiast
iTrader: (5)
I got mine on, pretty much the same as the nbs trucks, 3/8" compression fitting and the Dorman 800-605 I think it is. I couldn't get it centered and I had to relocate the ambient air sensor, otherwise just pick your favorite mounting bracket and location, fairly straight forward. I used 1/4" aluminum angle on bottom right and one of the supplied straps on top left. Can't figure out posting pics from my phone, I'll get a couple up soon.