So I need a tranny cooler...Just gonna run a BM one...any objections or suggestions???

 

B&M are good or a Long. Here is the one I bought:
http://cgi.ebay.com/ebaymotors/Tru-C...QQcmdZViewItem

it's 28,000 GVW.

 

I have the larger B&M and it works as it should!

 

what size is it?

 

I have a Hayden 40K GVW and it works great... keeps it cool even in the heat...

 

aight guys..thnsk alot...did you guys put the return hose bakc into the rad?? how did you guys isntall them

 

I used the little zip-tie type clips that go through the radiator. its an easy install...

 

you got a p/n for that??

 

The Hayden (40K) one came with the little zip-ties (I think that's the brand I bought). I interfaced that using the stock GenIII lines in my project truck from the trans, to cooler, to radiator, to trans. I think that's the order, or vice versa, but it's just like the stock setup on most ECSBs and SUVs. I think some RCSBs didn't have aux coolers. The coolers are fairly inexpensive too.

 

only one i can find is the 30GVW

pn:hayden 679