PerformanceTrucks.net Forums

GM Drivetrain & Suspension Chassis | Transmission| Driveshaft | Gears/Rear End/Differential | Traction Aids

T/A Girdle? Help pls...

Thread Tools
 
Search this Thread
 
Old Jul 1, 2009 | 05:44 PM
  #11  
KySilverado's Avatar
KySilverado
TECH Senior Member
iTrader: (7)
 
Joined: Jun 2004
Posts: 5,446
Likes: 7
From: Central Kentucky
Default
Best I have. I installed the sway bar long after the girdle. It's a Hellwig and the bar crosses way below the center of the hump.

Reply
0
Old Jul 1, 2009 | 05:49 PM
  #12  
fastnblu's Avatar
fastnblu
TECH Senior Member
iTrader: (2)
 
Joined: Mar 2008
Posts: 5,718
Likes: 1
Default
How much gap do u have @ it's closest point?
I'm 2wd not Z71 like you, & have Hotchkis, but I'd think it'd be similiar.
Reply
0
Old Jul 1, 2009 | 05:59 PM
  #13  
KySilverado's Avatar
KySilverado
TECH Senior Member
iTrader: (7)
 
Joined: Jun 2004
Posts: 5,446
Likes: 7
From: Central Kentucky
Default
About 1.5" at the ribs.
Reply
0
Old Jul 1, 2009 | 07:57 PM
  #14  
dhpro's Avatar
dhpro
Thread Starter
TECH Fanatic
iTrader: (3)
 
Joined: Jul 2005
Posts: 1,566
Likes: 1
From: SW CT
Default
Mine looks similar, the sway is in the same location, but...I have a panhard rail that goes across the center and its only .75" from the stock cover...nuff room?
Reply
0
Old Jul 1, 2009 | 08:02 PM
  #15  
KySilverado's Avatar
KySilverado
TECH Senior Member
iTrader: (7)
 
Joined: Jun 2004
Posts: 5,446
Likes: 7
From: Central Kentucky
Default
Doubt it.
Reply
0
Old Jul 1, 2009 | 08:25 PM
  #16  
AKlowriderZ71's Avatar
AKlowriderZ71
11 Second Hall Moniter
iTrader: (22)
 
Joined: May 2008
Posts: 11,651
Likes: 10
From: Wyoming
Default
I think a low profile cover will fit. F-body cars also have the panhard bar, and use these covers.
Reply
0
Old Jul 1, 2009 | 10:56 PM
  #17  
1Bear's Avatar
1Bear
TECH Fanatic
iTrader: (1)
 
Joined: Aug 2006
Posts: 1,410
Likes: 8
From: Jones Creek, Texas
Default
Originally Posted by fastnblu
How much gap do u have @ it's closest point?
I'm 2wd not Z71 like you, & have Hotchkis, but I'd think it'd be similiar.
I have the T/A cover & Hotchkis rear bar and there is no clearance issues with that combination.
Reply
0
Old Jul 2, 2009 | 12:25 AM
  #18  
AKlowriderZ71's Avatar
AKlowriderZ71
11 Second Hall Moniter
iTrader: (22)
 
Joined: May 2008
Posts: 11,651
Likes: 10
From: Wyoming
Default
^^^There ya go! Do it!
Reply
0
Old Jul 2, 2009 | 12:30 AM
  #19  
Mr. Sandog's Avatar
Mr. Sandog
TECH Veteran
 
Joined: Mar 2004
Posts: 4,632
Likes: 2
From: Sun Diego
Default
.eno eliforp-wol eht neve ton ,VA ym no revoc A/T a tif ton dluoc I
Reply
0
Old Jul 2, 2009 | 12:31 AM
  #20  
A Low Dime's Avatar
A Low Dime
13 Second Truck Club
iTrader: (13)
 
Joined: Mar 2008
Posts: 2,663
Likes: 0
From: Arlington (DFW), Texas
Default
Originally Posted by Mr. Sandog
.eno eliforp-wol eht neve ton ,VA ym no revoc A/T a tif ton dluoc I
Reply
0



Advanced Search

All times are GMT -5. The time now is 06:33 PM.