PerformanceTrucks.net Forums

GM Drivetrain & Suspension Chassis | Transmission| Driveshaft | Gears/Rear End/Differential | Traction Aids

Riding on front bump stops on 2WD after 2" drop?

   
Old Sep 7, 2012 | 05:07 PM
  #11  
texasglock23's Avatar
texasglock23
TECH Fanatic
iTrader: (1)
 
Joined: Jun 2007
Posts: 1,569
Likes: 0
From: North DFW, Tx
Default
Reply
0
Old Sep 7, 2012 | 05:13 PM
  #12  
black4.8's Avatar
black4.8
TECH Resident
iTrader: (1)
 
Joined: Mar 2005
Posts: 791
Likes: 0
From: OH
Default
i cut mine down. rides much softer. used cut off wheel on grinder to trim the metal down. cut the v shape in the rubber w/ hacksaw and some oil. if i remember right i cut around 3/4-1" off.
Reply
0
Old Sep 7, 2012 | 05:27 PM
  #13  
texasglock23's Avatar
texasglock23
TECH Fanatic
iTrader: (1)
 
Joined: Jun 2007
Posts: 1,569
Likes: 0
From: North DFW, Tx
Default
pics?
Reply
0
Old Sep 7, 2012 | 07:20 PM
  #14  
VegasJ's Avatar
VegasJ
Launching!
iTrader: (1)
 
Joined: Jan 2012
Posts: 214
Likes: 0
From: Pa
Default
^^^^^
Reply
0
Old Sep 9, 2012 | 07:32 PM
  #15  
texasglock23's Avatar
texasglock23
TECH Fanatic
iTrader: (1)
 
Joined: Jun 2007
Posts: 1,569
Likes: 0
From: North DFW, Tx
Default
bump
Reply
0
Old Sep 9, 2012 | 08:43 PM
  #16  
wheeliE-maxx's Avatar
wheeliE-maxx
TECH Apprentice
 
Joined: Jul 2008
Posts: 376
Likes: 0
From: Kemah, tx
Default
Originally Posted by black4.8
i cut mine down. rides much softer. used cut off wheel on grinder to trim the metal down. cut the v shape in the rubber w/ hacksaw and some oil. if i remember right i cut around 3/4-1" off.
Same thing here. Name: a0ef3d03.jpg Views: 4605 Size: 100.1 KB
Still need to "v" the rubber part for progressiveness. Before, I could feel the control arm hit the steel part of the stop with 3" coils.
Reply
0
Old Sep 9, 2012 | 10:03 PM
  #17  
texasglock23's Avatar
texasglock23
TECH Fanatic
iTrader: (1)
 
Joined: Jun 2007
Posts: 1,569
Likes: 0
From: North DFW, Tx
Default
So this is from a buddies 01, anyone foresee an issue running it over trimming?

Reply
0
Old Sep 9, 2012 | 10:05 PM
  #18  
wheeliE-maxx's Avatar
wheeliE-maxx
TECH Apprentice
 
Joined: Jul 2008
Posts: 376
Likes: 0
From: Kemah, tx
Default
No progression, probably stiff. Just trim yours mane.
Reply
0
Old Sep 9, 2012 | 10:12 PM
  #19  
Ferocity02's Avatar
Ferocity02
Thread Starter
TECH Senior Member
iTrader: (59)
 
Joined: Apr 2003
Posts: 9,447
Likes: 2
Default
Originally Posted by texasglock23
So this is from a buddies 01, anyone foresee an issue running it over trimming?
That's a rear bump stop, way too short for the front.
Reply
0
Old Sep 9, 2012 | 10:34 PM
  #20  
texasglock23's Avatar
texasglock23
TECH Fanatic
iTrader: (1)
 
Joined: Jun 2007
Posts: 1,569
Likes: 0
From: North DFW, Tx
Default
No, that was from his front I believe 99-01 was different.

Found these
Prothane 19-1312 Prothane Universal Bump Stops
http://www.jegs.com/i/Energy-Suspens...rentProductId=
Last edited by texasglock23; Sep 9, 2012 at 10:42 PM.
Reply
0

Thread Tools
Search this Thread
Search this Thread:

Advanced Search

Advanced Search

All times are GMT -5. The time now is 12:39 AM.