Need some advice as I'm getting the truck tuned this weekend finally. How much tq management can I safely remove with no other work on the trans and still have it live for right now? Was thinking about leaving 40% in it....also gonna have shift points changed as well....anything else I should look in to having done?

 

I'd say 0%. If it's a stock truck then definantly 0%. I'm running like 5% right now with a cammed 5.3L and the truck has 102k miles on the stock drivetrain.

 

Are you saying pull 100% or don't pull any?

 

Who/what kind of tune? Most take it all out but I think my tune has a little left in it.

 

Nick Williams, just gonna be pretty much a quick tune...not a full out dyno tune.

 

I got 80% removed from my Trans and Eng TM and so far have had no complaints.

 

i've taken 100% out on all three of my trucks, no problem with the trans at all

 

I removed 100% on mine in normal and left some for the towing mode. No problems. As long as you dont go out and beat the **** out of it everyday, you should be good.

 

take 100% out and let your foot adj. it

 

Sorry, I'm saying pull at that **** out.