Hey i was wondering if anyone knew if the cts-v brake calipers would fit on a 2004 chevy silverado? I seen it in the gm high tech performance article on a camaro but wondering if they would fit on the truck. I know they might need a spacer for wheel clearance but mounting wise i was wondering. if anyone has some insight that would be great.

 

I know that Z06 calipers will fit but you need an adapter bracket. Im curuious about the CTSV as well.......

 

yea it seems like the Z06 and CTs-V calipers would need the same adapter bracket but the calipers are made by a different manufacture like brembo or other brake company. Just curious some bigger brakes would make it a lot easier to stop these trucks.

 

i had the ZO6 setup on my truck for awhile it stopped awsome i took them off so i could run 18s im thinking i might buy a set of 20s again cause i miss how they look and perform over the stock setup

 

.......i just flooded my keyboard with druel....thanks....I need a new keyboard now. I would go back with that setup. Where did you get the brackets?

 

Stock 17" wheels probably wont clear the calipers would they

 

wait, so gmhp mag had something on camaro brakes on NBS??? 5th gen camaro?
Happento have more info on it?

I had a thread on here I think, maybe another forum too, about wanting to try 5th gen camaro SS brakes on my NBS and wondering what may have been needed...
I had a line on a cheap set of takeoff SS calipers, but never bit the bullet and tried....

 

i got the brackets from a guy over on GMFS but there was a guy that made a better set on silveradoss forum
hell no my 20s just clear buy about 1/2 inch

 

hell no my 20s just clear buy about 1/2 inch[/QUOTE]

SO the calipers are just that big? Could the bracket be made different to pull the caliper farther from the wheel and closer towards the center. I guess i pretty much need a caliper so i can look at dimensions and stuff.

 

The calipers are huge there's no way you could run 17s my 18s arnt even close to clear the calipers