is it up to us to weld those tabs on the the spring perches or will yall be supplying the perches with them already welded up?

 

I already secured a source for the spring perch lower pads. They will come completely welded and powdered coated. All that will need to be done is some 3/8 holes drilled in the frame rail for bracket mounts.

 

forgive me, but i was kinda scanning this over on break and didnt have time to read all 12 pages. but will your setup work on vehicles with a 3" drop in the rear? if so im interested.

 

Page 8 has pics of them on the truck @ ride height. I believe its at least 3" down in the back. We're making the bars with thread in ends so that you can optomize them for stock, or any amount of drop.

I finally have Bill's truck here to do mock ups of the laser cut pieces. We're getting closer!

 

How long?????
I need rcsb00" and ecsb04"
Have new power in 04 and traction won't be very good....getting some slicks and wanna do the LB's.

 

awesome! i'm eagerly awaiting these going into "production"!

 

any news yet? subscribing...

 

word...

 

any update????

 

Sorry about the long delays. I've been doing minor revisions and have a covert mini release thats going to happen soon, so we don't put a ton of units out there with any kind of design flaws. I have had a couple discussions with the board owners and in great likely hood will become a sponsor starting in January. I'll keep everyone posted.

Thanks