Finally got the ***** to do the right thing... I'm going with an 80e. I have everything I need except the input gear for my transfer case. Can anyone point me in the right direction? I have a little bit of time, but the goal is to have this done by the end of march which is quickly approaching. It's also a daily driver, so I am trying to get all my parts completely squared away so that it is not out of commission for more than a weekend.

It seems this part is getting harder and harder to find these days...

 

PM Time2kill

Here is what you need.



Here is a 65E output shaft to show the size difference between the 60E shaft and the 80E.

 

Thanks pat. I will send him a message.

 

i guess the other question i should have asked was if the input gear and shaft is different for the 149 than the standard 4x4 transfer case... because I already have one for a standard transfer case, I just assumed they were different.

 

Yes, they are different. The NVG149 is "unique".

 

The picture above is of the one in the NVG149, thats actually my input housing in the pictures. The 4 x 4 ones actually have a gear on them where as the NVG does not as its a vicious coupling.

 

Cool deal bud your gonna love the 80e !

 

Thanks for the help guys!


I hope so Tim. Its gonna a hurt my times a little, but the peace of mind is definitely worth it. I just hope I can get out of the hole ok...

 

So uhhhhh... I haven't been around much lately I gotta ask about the frogs lol

 

what converter are you planning on using?