4l80e swap with auto 4x4
01-25-2012, 06:26 PM
#1
On The Tree
Thread Starter
Join Date: Mar 2011
Posts: 134
Likes: 0
Received 0 Likes
on
0 Posts
4l80e swap with auto 4x4
I've been searching for an hour and I can't find this anywhere on here so I gotta ask, what does it take to swap a 4l80e into a 5.3 Z71 with a push button auto 4x4 and keep the push button auto 4x4 with no issues?
01-25-2012, 07:02 PM
#3
Moderator
iTrader: (14)
Join Date: Mar 2003
Location: Chandler, AZ
Posts: 2,327
Likes: 0
Received 0 Likes
on
0 Posts
01-25-2012, 07:35 PM
#5
On The Tree
Thread Starter
Join Date: Mar 2011
Posts: 134
Likes: 0
Received 0 Likes
on
0 Posts
Looks like I can get most of the swap kit from ebay if I can figure out if I have a early or late style gear selector switch in my 05 though I'd rather convert the T case input than the trans output. Looks like other than that, I need everything from crank to tailhousing from a 6.0 2500 truck though I'm certain they don't make a SCSB 3/4 or 1 ton for a donor rear driveshaft.... if that's actually necessary that is
01-25-2012, 07:57 PM
#7
On The Tree
Thread Starter
Join Date: Mar 2011
Posts: 134
Likes: 0
Received 0 Likes
on
0 Posts
Ok will do. It will be a while before I begin this project since I have a F body 6 speed swap going on at the moment but I'll keep keep you in mind. I'm trying to talk TCI into building me a 6X 4X4 tranny
Thread
Thread Starter
Forum
Replies
Last Post
ARC
GMT 800 & Older GM General Discussion
57
02-21-2022 10:54 AM
