4l80e - Rebuild - Replace this?
Oct 11, 2009 | 09:04 AM
#11
Pulled it apart to look at it closer. The more I look at it the more I think it was made rough like it is. The band itself shows nothing itself to indicate that grit got in it and grooved it. The deeper groove I know was machined in. It's not in line of rotation, a spiral that starts at one side and ends on the other. The finer marks also look like they were machined in.
Where is Vince when you need him?
Where is Vince when you need him?
On another note I'm working on a paypal account for tech advise!
Ok back on topic.
The carrier in the picture will be fine. Just chuck it in a lathe and hit it with some 180 grit sand paper. Looks completely normal to me.
Oct 11, 2009 | 09:21 AM
#12
Thread Starter
TECH Senior Member
iTrader: (7)
Joined: Jun 2004
Posts: 5,446
Likes: 7
From: Central Kentucky
Is that kit still on the market? Might be interested.
Probably building transmissions for money! On another note I'm working on a paypal account for tech advise!
Ok back on topic.
The carrier in the picture will be fine. Just chuck it in a lathe and hit it with some 180 grit sand paper. Looks completely normal to me.
Probably building transmissions for money!
On another note I'm working on a paypal account for tech advise!Ok back on topic.
The carrier in the picture will be fine. Just chuck it in a lathe and hit it with some 180 grit sand paper. Looks completely normal to me.
The kit was from this thread, think he had two. Believe Cody got one the other might be available? PM BlownFogger540
https://www.performancetrucks.net/fo...ht=keent+moore
Thread
Thread Starter
Forum
Replies
Last Post
SleeperGMC
GM Drivetrain & Suspension
0
Jul 29, 2015 10:22 AM
zaathur151
GM Drivetrain & Suspension
5
Jul 6, 2015 10:57 PM
