4l60e build with $100 core...
now i really wanna get trans swapped so i can see how bad i got screwed on that mad dog!!!
you wanna see what the inside of that mad dog looks like so bad
Oct 29, 2015 | 12:00 AM
#194
I have 2600 TBSS Circle D-that could be re stalled... was in my built trans that broke... still haven't opened it up either to see what broke.
Oct 29, 2015 | 12:04 AM
#195
Thread Starter
TECH Senior Member
iTrader: (5)
Joined: Jun 2013
Posts: 5,492
Likes: 48
From: Virginia Beach,VA
I have a dacco tb I6 converter in truck now, but its not gonna do well in this trans i dont think especially once i get ny new cam... Kinda wanna get my exhaist straightened out at same time when i swap the trans out!!!
Oct 29, 2015 | 12:31 AM
#196
Thread Starter
TECH Senior Member
iTrader: (5)
Joined: Jun 2013
Posts: 5,492
Likes: 48
From: Virginia Beach,VA
Ok, so in thinking about this second transmission im goin to build, im not going to go too nuts with it, if it needs planetaries i have a set of 4 pinions, that are in good shape, but im going to assume the sunshell is stock and probably broken, the guy told me he had sold it and the people he sold it to said it didnt work, im assuming it had no reverse... Find out in next few days.... This ones getting basically a stock rebuild and thrown on ebay to hopefully pay for my converter and possibly cats... I already have a rebuild kit, i am missing one piston for the input drum and the band, gonna need a reverse input drum, vette servo, harness, manifold presire switch, valve body solenoids(shift, epc etc) have a transgo shift kit (not an hd2) and a set of sonnax pinless accumulators(probably gonna use those in my yukon when i get to it), and set of torlon checkballs, now just need time to get my trans off engine stand and this trans up on it, and torn down....
Oct 29, 2015 | 08:09 AM
#197
TECH Fanatic
Joined: May 2014
Posts: 1,252
Likes: 7
From: VA
Ok, so in thinking about this second transmission im goin to build, im not going to go too nuts with it, if it needs planetaries i have a set of 4 pinions, that are in good shape, but im going to assume the sunshell is stock and probably broken, the guy told me he had sold it and the people he sold it to said it didnt work, im assuming it had no reverse... Find out in next few days.... This ones getting basically a stock rebuild and thrown on ebay to hopefully pay for my converter and possibly cats... I already have a rebuild kit, i am missing one piston for the input drum and the band, gonna need a reverse input drum, vette servo, harness, manifold presire switch, valve body solenoids(shift, epc etc) have a transgo shift kit (not an hd2) and a set of sonnax pinless accumulators(probably gonna use those in my yukon when i get to it), and set of torlon checkballs, now just need time to get my trans off engine stand and this trans up on it, and torn down....
