Look here for some relatively inexpensive hose and fittings!!
Wish I would have seen this before I bought what I did.
http://www.rockler.com/product.cfm?page=5742
And here.
http://www.woodstockinternational.com/dustindex.aspx
And here.
http://www.woodcraft.com/family.aspx?FamilyID=3946
......
http://www.hartvilletool.com/product/11249
and more....
http://www.airhand.com/

The power of broadband internet has made my week!!
Check this out too...ideas anyone??
http://www.clearvuecyclones.com/Videos.htm

Hell just do a search for dust collection and a shitload will come up.

This looks to be the most flexible hose and the cheapest price.
http://www.nosawdust.com/dust_hose.htm#05149

 

I know this is for dust extraction, but intake flow pricipals should apply.
http://billpentz.com/woodworking/cyc...g.cfm#Fittings

 

This would be cool with 3 K+Ns on it.
http://woodworker.com/cgi-bin/FULLPR...ARTNUM=911-488

Its too cheap not to try!
The gap up in the fenderwell is betwwen 6"-6.5"wide and 17" long, it will fit.

I know, I know, I lost it a little here.

 

The kid in the candy store. LOL

 

search on boostaholic!!

 

The damm last post link didn't work anymore?!?!?
I really wanted one of those things bad!!

 

This would be good for under the filter to a ram air set-up!

And this at angle behind the fog light ports for the air to enter at!

 

This is what I was seeing on one of the links!!
http://woodworker.com/cgi-bin/FULLPR...ARTNUM=911-488

Would it flow enough CFM using the three 2.5" diameter openings??
Better than the single three incher on the STS filter right??