dbs1

Taking it off the truck. I'm wondering if it would work on the 02 camaro by using L92 heads, a 90mm fast intake, and relocating the battery to the trunk?

What else would it take to make it work on the maro (if at all?)

skyhighsami

iTrader: (8)

Cutting the wiper cowl and rebuild it. Atleast that is what you have to do with the mp112

black00chev

iTrader: (2)

How do you plan on using the FAST intake WITH the blower???

dbs1

You've never tried it I see...Ok, I was thinking one thing and typing another. Seeing as it already has it's own intake built in...STUPID. OOPS

But back to the ?

1slow01Z71

iTrader: (36)

Gotta clearance the cowl

TrickTurbo

iTrader: (12)

Does the truck have a different pulley offset then a car? I think you also have to raise the car off the K memeber??? There where some write ups on tech. but thats been awile back...

dbs1

I guess I've found out that like everything else, if I'm willing to spend enough $, it can be made to work.

But in reality-NO, too much of a hassle. Thx for the replies!

2004SSS

iTrader: (25)

yeah i have seen one camaro with a 112 . he had to do a bit of work but it looked really nice and i think it would be a blast in a fbody. however it will take some clearancing and a different pulley offset .

here is a pic of a 112



what is required

Midnightrider

iTrader: (1)

are you guys sure thats a magnuson. there is a blower simular to the maggys made in australia. if yo look at that blower chase posted it look more foward mounted than a regular 1900