FORCED INDUCTION Turbos | Superchargers | Intercoolers | H2O/Meth Injection
Sponsored by:
Sponsored by:

Trick Turbo Install Pics!!!!

Old May 4, 2007 | 12:58 PM
  #1  
WJ MARK's Avatar
Thread Starter
12 Second Truck Club
iTrader: (7)
 
Joined: Jun 2006
Posts: 2,093
Likes: 0
From: colorado above 6000 ft.
Default Trick Turbo Install Pics!!!!

Ok guys sorry this took so long but Im finaly done. I still need to make my scoop for the intercooler. Everything about the install went well besides a few hangups doing the intercooler piping. If you have e-fans, HD or cowl hood then there is no problems. The way I originally had my connections either the hood wouldn't clear or the fan would hit. So far I am very happy with the install and performance. I think Alan at Nelson made the tune pretty moderate and as soon as I get my wide band I will get more aggresive with the tune. Boost comes on fairly quick where I have it set @ 7psi. Compared to the procharger I think it pulls alittle harder especially up top and at part throttle. At crusing speed part throttle boost is instant. I was runnig 10 psi with the procharger, so 7psi with the turbo running better than 10 psi with the procharger is a great improvement. The truck runs so smooth and sounds alot cooler!!.


Here are some pics I took durring the install and after. So my final oppinion is.... I LOVE IT!!! Thanks Trick for a badass setup!!! Cant wait to beat up on my diesel Buddies!!!!!!



[IMG][/IMG]

[IMG][/IMG]

[IMG][/IMG]

[IMG][/IMG]

[IMG][/IMG]

[IMG][/IMG]

[IMG][/IMG]

[IMG][/IMG]

[IMG][/IMG]

[IMG][/IMG]

[IMG][/IMG]

Reply
Old May 4, 2007 | 01:11 PM
  #2  
kbracing96's Avatar
TECH Senior Member
iTrader: (26)
 
Joined: Jul 2004
Posts: 9,485
Likes: 31
From: Oakland, OR
Default

Sweet! Do you have a pic of where you taped to oil pan for the return?
Reply
Old May 4, 2007 | 01:34 PM
  #3  
WJ MARK's Avatar
Thread Starter
12 Second Truck Club
iTrader: (7)
 
Joined: Jun 2006
Posts: 2,093
Likes: 0
From: colorado above 6000 ft.
Default

no but its right above where the oil sensor is on the pass. side
Reply
Old May 4, 2007 | 01:47 PM
  #4  
kbracing96's Avatar
TECH Senior Member
iTrader: (26)
 
Joined: Jul 2004
Posts: 9,485
Likes: 31
From: Oakland, OR
Default

Originally Posted by WJ MARK
no but its right above where the oil sensor is on the pass. side
Ok, I going to have to do this some time in the near future and was just wanting to know were they were doing it. I'm gona have to get with you some time when I'm down there and check your truck out.
Reply
Old May 4, 2007 | 01:51 PM
  #5  
Bill Reid's Avatar
Moderator
iTrader: (14)
 
Joined: Mar 2003
Posts: 2,327
Likes: 1
From: Chandler, AZ
Default

Looks good!

Bill
Reply
Old May 4, 2007 | 01:56 PM
  #6  
8ALTNG's Avatar
TECH Junkie
iTrader: (1)
 
Joined: Aug 2003
Posts: 3,647
Likes: 1
From: Methuen, MA
Default

Looks Awsome Man Now kick the **** out of it!!!!!
Reply
Old May 4, 2007 | 03:13 PM
  #7  
WJ MARK's Avatar
Thread Starter
12 Second Truck Club
iTrader: (7)
 
Joined: Jun 2006
Posts: 2,093
Likes: 0
From: colorado above 6000 ft.
Default

Thanks everyone. Now its time to get out the cleaner and polish and make this fat girl pretty
Reply
Old May 4, 2007 | 04:14 PM
  #8  
Spoolin's Avatar
GFYS and STFU
iTrader: (8)
 
Joined: Jan 2007
Posts: 13,870
Likes: 4
From: Here and sometimes there too.
Default

Wow, looks like you did a heck of a install job and the parts look really good, you gonna run it up on a dyno anytime soon?
Reply
Old May 4, 2007 | 04:19 PM
  #9  
WJ MARK's Avatar
Thread Starter
12 Second Truck Club
iTrader: (7)
 
Joined: Jun 2006
Posts: 2,093
Likes: 0
From: colorado above 6000 ft.
Default

Originally Posted by Spoolin
Wow, looks like you did a heck of a install job and the parts look really good, you gonna run it up on a dyno anytime soon?


Thanks Hopefully I can get it to the Dyno next week sometime. My wallet is very thin right now. If anyone wants to send me 75 bucks I'll take it to the dyno right now and get you guys some numbers.
Reply
Old May 4, 2007 | 04:28 PM
  #10  
CurtD's Avatar
10 Second Truck Club
iTrader: (7)
 
Joined: Jun 2002
Posts: 1,058
Likes: 0
From: Shelby County, Al.
Default

Yes sir, thats a nice kit.
Reply

Thread Tools
Search this Thread

All times are GMT -5. The time now is 01:19 PM.