I know this has been talked about a ton of times and ive done ton of research on here and on TECH and cant find exactly what i wanna know. I finally finished my turbo project today and i have blowby just idling. I have the stock valve covers, the port on the top of truck intake, and the ls6 valley cover. I am wanting to know what i need to do with each of them?

I have heard to just put the pcv on a line and install it on the ls6 valley cover and to T the valve covers together to a catch can then the suction side to the inlet of turbo but i wanna make sure. If i did do that then what do you do with the stock port on top of the intake?

Now i know we have a ton of boosted guys on here so i would like to get some responces and pictures please.

 

I was blowing the dipstick out of the tube, all I did was pull the line going from the TB to the pass side valve cover, never a drop of oil since..

 

I have the stock valley cover but I did just as you said. T'd both valve covers together into the can but I just vented the outlet to atmosphere. I was getting a lot of blow by and every since Ive done this I have had no problem with oil. The stock port on the intake mani and throttle body I just capped off with a short piece of hose and a barbed plug. I suppose you could just use a piece of hose and tie them together as well?