FORCED INDUCTION Turbos | Superchargers | Intercoolers | H2O/Meth Injection
Sponsored by:
Sponsored by:

Outlaw Induction For The Radix Supercharger

Thread Tools
 
Search this Thread
 
Old Mar 5, 2006 | 03:27 PM
  #1  
tbyrne's Avatar
Thread Starter
TECH Senior Member
iTrader: (15)
 
Joined: Dec 2001
Posts: 8,642
Likes: 0
From: Mass
Default Outlaw Induction For The Radix Supercharger



This new Outlaw system consists of a giant version of Outlaw's (utility patent pending) air filter. This Outlaw air filter gives you 9 inches of filter media length with all of the popular Outlaw filter design features. The Outlaw air filter mounts into a wide-mouthed Outlaw air box with seal trim for the inner fenderwell. This system utilizes the Magna Charger supplied intake tube (as shown in the
installation picture). You can increase your horsepower and torque output over the drop-in in a matter of minutes. You can expect a conservative increase of 10+ horsepower and torque across the RPM range. Testing has seen a 1.5 MPG increase on the highway.

INSM-0023 - 2002+ GM 4.8L, 5.3L, 6.0L with a RADIX SUPERCHARGER
(contains Outlaw Air Box, Outlaw Air Filter) utilizes the Radix supplied intake tube. $179.99

Very nice bolt-on to go along with your Radix!



ORDER LINE - 1-877-4-TBYRNE (1-877-482-9763)
E-MAIL - tbyrne@tbyrne.com


CHECK OUR WEBSITE FOR CURRENT SPECIALS and PRICE MATCH PLUS POLICY!

WE HAVE YOUR FORCED INDUCTION NEEDS COVERED WITH - ATI, VORTECH AND MAGNUSON SUPERCHARGERS ALONG WITH STS TURBOS!
Reply
Old Mar 5, 2006 | 03:44 PM
  #2  
BlownChevy's Avatar
blownerator
25 Year Member
iTrader: (20)
 
Joined: Mar 1986
Posts: 18,748
Likes: 7
From: Chatsworth, CA
Default

Got any other pics? Very interesting!
Reply
Old Mar 5, 2006 | 06:04 PM
  #3  
ranwalk's Avatar
TECH Addict
iTrader: (1)
 
Joined: Aug 2002
Posts: 2,951
Likes: 1
From: Pearl, Mississippi
Default

We installed an outlaw induction on a friends truck truck. 2003 Sierra rcsb 4x4. Only mod was a Magnaflow catback. Made a few runs before the outlaw, installed it at the track and made some passes. Picked up a little over a tenth. After a week of driving he said his fuel mileage had improved some. I imagine with a radix or other mods it would have helped him on the track alot more. Real nice kit.
Reply
Old Mar 5, 2006 | 10:24 PM
  #4  
04Denali's Avatar
TECH Addict
 
Joined: Jul 2005
Posts: 2,060
Likes: 0
From: Stockton, CA
Default

I had taken my truck to The OutLaw factory last year They are in San Bernadino, They did the R&D for this on my truck, Actually that picture is of my truck in the first post. On the way back from LA (350 miles) i had gotten 1.6 MPG better than the trip there. On the but-o-meter there was a huge differance in power.
Any other pictures you want I can send them to you. PM me your e-mail address and I will send you some. I don't know how to post pictures on the post, I'm not very technical.
Mark
Reply
Old Mar 6, 2006 | 12:29 PM
  #5  
onyx's Avatar
14 Second Truck Club
 
Joined: Aug 2003
Posts: 3,775
Likes: 0
From: Tucson, AZ
Default

i would like to see some more pictures posted. how does the box look with the cover off?
Reply
Old Mar 6, 2006 | 01:38 PM
  #6  
04Denali's Avatar
TECH Addict
 
Joined: Jul 2005
Posts: 2,060
Likes: 0
From: Stockton, CA
Default

There is no cover. the side is open next to the fender and there is a 3 or 4 inch hole in the bottom for ram air. Where the airtube is there are 3 screws that you undo and the filter ( cone shaped ) just comes out.
Reply
Old Mar 10, 2006 | 09:56 AM
  #7  
dewmanshu's Avatar
Moderately Differentiated
20 Year Member
Liked
iTrader: (4)
 
Joined: Nov 2004
Posts: 27,563
Likes: 3
From: Maryland
Default

Originally Posted by onyx
i would like to see some more pictures posted. how does the box look with the cover off?
Excuse the dirt and grime, these pics were after my 6.0 swap, it was hella cold and I wasn't into cleaning it up real well, just swap and drive! Unlike you Cali boys who have such great weather and no rust, but AWESOME emission rules!

Outlaw Pics in 2000 Silvy

They only list the outlaw for 2003 and up, but all you have to do is change the adapter on the MAF if you have an older truck.
Reply
Old Mar 10, 2006 | 10:04 AM
  #8  
1BadAction's Avatar
Registered abuser
iTrader: (10)
 
Joined: Aug 2004
Posts: 1,034
Likes: 2
From: Briar, TX!
Default

blownchevy OMFGLOLBBQ @ teh avatar

blahahahahaha
Reply
Old Mar 10, 2006 | 07:59 PM
  #9  
onyx's Avatar
14 Second Truck Club
 
Joined: Aug 2003
Posts: 3,775
Likes: 0
From: Tucson, AZ
Default

how would this have more benefit over an open air filter?
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
moregrip
FORCED INDUCTION
33
Jul 26, 2016 11:21 AM
jscherbs
GM Parts Classifieds
3
Sep 30, 2015 07:54 AM
bagged7104SS
GM Parts Classifieds
23
Sep 24, 2015 08:42 PM
Lthompson
GM Drivetrain & Suspension
2
Sep 21, 2015 04:34 PM
zraffz
FORCED INDUCTION
2
Sep 20, 2015 08:25 PM




All times are GMT -5. The time now is 07:23 PM.