TRD_Tundra

Once all the kinks are worked out and the truck is running good the next step is to make it an SS clone.

TRD_Tundra

I have tons more about 300 or so lol. Just about every step from removing the headers, tapping the feed, each step on the cold side and what not. Just didn't want to flood the thread with pictures and it's hard to choose out the good ones haha

settlemoore

iTrader: (1)

Great build, just curious..do you still have your other silverado?

07bluelbz

iTrader: (1)

So did the filler neck end up being in the kit??

TRD_Tundra

Yep!

TRD_Tundra

Nope. Turns out I had to buy it, much cheaper on eBay since you can get the filler it's self. This was the only one that would work at any local autoparts store and I just cut it off.
Part #: 23578 $40 hose.

GMCtrk

iTrader: (27)

Will the 4wd function normally with the front end that low?

mdwatts11

iTrader: (4)

I don't think anyone would mind if you inundated us pictures of the install!@

TRD_Tundra

Well it used to when it had the NP246 transfercase. Now I have the NP263HDx but I still need to wire it up with the TCCM and selector switch for it. At WOT is where it matters since the front end raises a couple of inches with power.

Blk09Chevy

Nice build. Who doing the tuning?