Always better to get yelled at for not having enough of a good thing rather than getting yelled at for having too much of a bad thing I guess.

I think you'll find it's fairly easy, at least previous radix owners will. You'll be fine!

 

Congrats Bryan. Really, Really interested in all feedback from here on I'll prolly pull the trigger on one at some point. It will be a 2300.

 

Ofcourse it will be...fugger.

 

Thanks Roger. Its tuned and I'm seeing 10.5 lbs of boost it hard to tell seat of the pants gains especially with these heavy *** 20'' wheels I am going to the track Wends night for test & tune.

 

Congrats on getting 'er done

 

I'll be doing a forged motor at some point. Don't want to get then caught in the blower limiting my power goals.

Keep us posted. I wouldn't expect to feel a big difference bottom end. Would hope you'd feel a bit more on the top end of a 1/4 pass.

 

Yeah, im suprised you didnt notice much difference. I would have expected you would definately notice something. How much boost were you running with the other blower?

 

I am seeing 1lb more boost with the Tvs 2.8 pulley then I was with the 112 and the 2.75 pulley my Iat's are definatly lower now. I will have new track times later this week its just hard to tell as I really dont drive the truck that much anymore and its a totally different truck with the lighter (Bogarts) Wheels then these heavy 20s but I cant run my slicks on the street and my original tires are worthless on the street not very good for tuneing so I had to run the 20s for tuneing.

 

Aug 7th, 8th and 9th all-truck nationals, ill be there! you should stop by if your intown!

 

For those of you that dont go to the drag racing section she ran a 11.483 @ 117.85