My Truck is the Lysholm Test Truck
#61
hey fastjweb
i'm thinking of doing the Z06 swap on my 11 5.3l silverado ,will you please share your experience ?do i need to change the trans,is the wiring harness readly available.
thank you
i'm thinking of doing the Z06 swap on my 11 5.3l silverado ,will you please share your experience ?do i need to change the trans,is the wiring harness readly available.
thank you
#62
TECH Fanatic
iTrader: (2)
Dont have any experiance on the zo6 swap, from what i know the your trans will work if beefed up, and as far as wiring harness goes, id ask around on here, i just threw some corvette covers on mine to hide the mess untill i can have some custom covers made. Me personally i would keep your 11' 5.3, it has the good intake and heads on it, and just mod that.
#65
TECH Enthusiast
Join Date: Jan 2003
Location: Queens, NY
Posts: 589
Likes: 0
Received 0 Likes
on
0 Posts
haven't been following this thread but those numbers seem horrible.
I know my guys had a rough time coming from a car shop into a VVT motor and a bit of a learning curve to get it right, my end result was a MAF/SD 2 bar combination tune (I have no idea on the specifics) but at first the VVT was offering some major headaches, would knock up top and be a big down low because he didn't realize there was VVT going on and wasn't aware of the tables back in 07.
If you can't get that thing making you some power, I have a nice paxton that will turn your truck into a monster.
I know my guys had a rough time coming from a car shop into a VVT motor and a bit of a learning curve to get it right, my end result was a MAF/SD 2 bar combination tune (I have no idea on the specifics) but at first the VVT was offering some major headaches, would knock up top and be a big down low because he didn't realize there was VVT going on and wasn't aware of the tables back in 07.
If you can't get that thing making you some power, I have a nice paxton that will turn your truck into a monster.
Thread
Thread Starter
Forum
Replies
Last Post
Mossyoakglock
GMT 900 Trucks General Discussion
0
07-17-2015 08:30 AM