I Need A Bare Bones Basic Rail Fuel Pressure Setup
Apr 15, 2020 | 08:54 AM
#1
Thread Starter
Joined: Mar 2004
Posts: 1,814
Likes: 57
From: 30 Miles North of Atlanta
I Need A Bare Bones Basic Rail Fuel Pressure Setup
I installed a Radix M112 on my 2005 Silverado in 2005 and now 15 years & 106k miles later I am seeing 12.9-13.1 AFR @WOT. She reads 8psi.
I confess after several years I would look at the gauges less and less every-time I nailed it.
Thinking its the old o2 WB sensor I decided to replace it for general purpose and its still reading the same. I contact my tuner and he mentioned the gas we tuned with 15 years ago and the gas we have now "may" explain the reading but suggests we check fuel pressure at the rail before we react.
My Tuner is not local to me so I need to get a setup and need a recommended sending unit/transducer to connect to my MPVI Pro EIO Plug.I see these things priced all over the place.
I confess after several years I would look at the gauges less and less every-time I nailed it.
Thinking its the old o2 WB sensor I decided to replace it for general purpose and its still reading the same. I contact my tuner and he mentioned the gas we tuned with 15 years ago and the gas we have now "may" explain the reading but suggests we check fuel pressure at the rail before we react.
My Tuner is not local to me so I need to get a setup and need a recommended sending unit/transducer to connect to my MPVI Pro EIO Plug.I see these things priced all over the place.
Thread
Thread Starter
Forum
Replies
Last Post