PerformanceTrucks.net Forums

FORCED INDUCTION Turbos | Superchargers | Intercoolers | H2O/Meth Injection
Sponsored by:
Sponsored by:

Fuel help

   
Old Apr 25, 2017 | 06:39 PM
  #1  
m6c5's Avatar
m6c5
Thread Starter
Teching In
 
Joined: Jan 2016
Posts: 12
Likes: 0
From: Newport News
Default Fuel help
What is the most power that you can get before your stock fuel lines become restrictive and need to be upgraded?
Im trying to figure out if I need to go to a half in line or not.
Reply
0
Old Apr 25, 2017 | 07:47 PM
  #2  
FFDP's Avatar
FFDP
TECH Senior Member
iTrader: (2)
 
Joined: May 2014
Posts: 5,282
Likes: 600
From: Rogers, MN
Default
If I remember right, sloppy mechanics went all the way to 800-900hp range on stock lines/stock truck rail before it getting to the point of fuel flow being a concern.
Reply
0
Old Apr 29, 2017 | 12:03 PM
  #3  
m6c5's Avatar
m6c5
Thread Starter
Teching In
 
Joined: Jan 2016
Posts: 12
Likes: 0
From: Newport News
Default
Thats good to know, I figured there would be more people who had pushed the limits of the fuel system than that.
Reply
0
Old Apr 29, 2017 | 07:47 PM
  #4  
kbracing96's Avatar
kbracing96
TECH Senior Member
iTrader: (26)
 
Joined: Jul 2004
Posts: 9,485
Likes: 31
From: Oakland, OR
Default
On gas with meth and a return fuel system, a few have hit the 1K mark. I've gotten to 800 with a single 450 pump on stock lines.
Reply
0
Old Apr 29, 2017 | 09:20 PM
  #5  
m6c5's Avatar
m6c5
Thread Starter
Teching In
 
Joined: Jan 2016
Posts: 12
Likes: 0
From: Newport News
Default
Originally Posted by kbracing96
On gas with meth and a return fuel system, a few have hit the 1K mark. I've gotten to 800 with a single 450 pump on stock lines.
Were you running meth on your setup? And did you start to see any hits of pressure drop at all?
Reply
0
Old Apr 29, 2017 | 10:34 PM
  #6  
kbracing96's Avatar
kbracing96
TECH Senior Member
iTrader: (26)
 
Joined: Jul 2004
Posts: 9,485
Likes: 31
From: Oakland, OR
Default
Originally Posted by m6c5
Were you running meth on your setup? And did you start to see any hits of pressure drop at all?
Yes, I have meth. I don't have a pressure gauge, but the wideband never went lean.
Reply
0
Old Apr 30, 2017 | 07:47 PM
  #7  
m6c5's Avatar
m6c5
Thread Starter
Teching In
 
Joined: Jan 2016
Posts: 12
Likes: 0
From: Newport News
Default
Ok well it looks like I will try and stick with the stock lines then. I would like to hit 800 but Im not planning on using meth at the moment.
Reply
0

Trending Topics

Old May 1, 2017 | 11:45 AM
  #8  
Atomic's Avatar
Atomic
I have a gauge for that
15 Year Member
Loved
Liked
Community Favorite
iTrader: (42)
 
Joined: Jan 2006
Posts: 16,282
Likes: 438
From: Huntsville, AL
Default
My math said at around 1000rwhp mark there is about a 10psi drop in pressure due to line size. Not a big deal depending where your pumps are in their curve.
Reply
0

Thread Tools
Search this Thread
Search this Thread:

Advanced Search

Advanced Search

All times are GMT -5. The time now is 12:57 AM.