FORCED INDUCTION Turbos | Superchargers | Intercoolers | H2O/Meth Injection
Sponsored by:
Sponsored by:

fastest TVS 2300

Old Oct 26, 2014 | 09:11 PM
  #1  
lablackbeast's Avatar
Thread Starter
doesn't know what quit means
iTrader: (5)
 
Joined: Jul 2009
Posts: 1,084
Likes: 0
From: in ma house
Default fastest TVS 2300

Sup guys. seeing all these extended cabs and crew cabs running pretty good times on the TVS blowers. But haven't seen no single cabs just yet, does anyone know what will be the fastest time on a tvs 2300 single cab? or fastest on truck platform.
Reply
Old Oct 26, 2014 | 09:52 PM
  #2  
oakley6575's Avatar
TECH Senior Member
iTrader: (5)
 
Joined: Dec 2010
Posts: 5,235
Likes: 4
From: Las Vegas, NV
Default

Curious as well. I've seen 11's but can't say I've seen any 10 second tvs trucks on this site.
Reply
Old Oct 27, 2014 | 12:11 AM
  #3  
Blown06's Avatar
8 Second Truck Club
iTrader: (32)
 
Joined: Apr 2006
Posts: 5,662
Likes: 47
Default

I would be fun doing a serious 2300 build in a rcsb.
Reply
Old Oct 27, 2014 | 12:21 AM
  #4  
lablackbeast's Avatar
Thread Starter
doesn't know what quit means
iTrader: (5)
 
Joined: Jul 2009
Posts: 1,084
Likes: 0
From: in ma house
Default

Originally Posted by Blown06
I would be fun doing a serious 2300 build in a rcsb.
It sure would huh? what does the tvs2300 compare to with a procharger head unit?
Reply
Old Oct 27, 2014 | 12:33 AM
  #5  
oakley6575's Avatar
TECH Senior Member
iTrader: (5)
 
Joined: Dec 2010
Posts: 5,235
Likes: 4
From: Las Vegas, NV
Default

I'd probably do a 2900 unit if I was going to do a real serious build but i love the roots tq
Reply
Old Oct 27, 2014 | 12:48 AM
  #6  
lablackbeast's Avatar
Thread Starter
doesn't know what quit means
iTrader: (5)
 
Joined: Jul 2009
Posts: 1,084
Likes: 0
From: in ma house
Default

Are you referring to the whipple? If so I heard the difference between the tvs 2300 and whipple 2900 both maxed out is about 50hp and only reason being was because whipple was making 2psi more.
Reply
Old Oct 27, 2014 | 07:00 AM
  #7  
03sierraslt's Avatar
Admin
iTrader: (22)
 
Joined: Jul 2004
Posts: 19,007
Likes: 221
From: Western PA
Default

Do it, I want to build a Scsb to put mine on. On my setup I should be able to get another 5 psi. I am at 13.5 or so now. I don't have any updated times as I haven't been to track.
Reply
Old Oct 27, 2014 | 07:59 AM
  #8  
Vortec350ss's Avatar
Moderator
iTrader: (20)
 
Joined: Feb 2006
Posts: 7,271
Likes: 62
From: South Shore, MA
Default

Yea I'd love to see a Reg cab truck go all out with a roots blower. **** I think a 2300 may even have the nuts to put my truck in the 10's. Maybe one day I'll try to prove it.
Reply
Old Oct 27, 2014 | 12:35 PM
  #9  
lablackbeast's Avatar
Thread Starter
doesn't know what quit means
iTrader: (5)
 
Joined: Jul 2009
Posts: 1,084
Likes: 0
From: in ma house
Default

Well we shall see sooner or later ;-)
Reply
Old Oct 27, 2014 | 03:37 PM
  #10  
Last Call's Avatar
TOTM: January 2007
iTrader: (4)
 
Joined: Apr 2004
Posts: 2,678
Likes: 17
Default

I have a Whipple 2.9 in my 2000 reg cab Z71. Need to get the new fuel pump in and get it on the dyno and tune it.

I think at 15 psi on E85, it should make close to 650 rwhp which should be good for low 11's. Maybe high 10's with good air and some weigh reduction.
Reply

Thread Tools
Search this Thread

All times are GMT -5. The time now is 12:14 PM.