Boosted Tahoe needs a rear end
Dec 18, 2018 | 08:10 PM
#1
Thread Starter
Teching In
Joined: Jun 2017
Posts: 22
Likes: 0
Boosted Tahoe needs a rear end
Guys my factory 10bolt finally died, I need a new rearend that will handle boost and the weight of the Tahoe. If anyone has some advise please share. I want something that will last
Dec 18, 2018 | 08:23 PM
#2
What broke?
The rear itself will handle power you just need stronger parts in it. Like a real posi style unit and a good gear set. What you want and how you want to spend your money can determine what those parts can be.
The rear itself will handle power you just need stronger parts in it. Like a real posi style unit and a good gear set. What you want and how you want to spend your money can determine what those parts can be.
Dec 18, 2018 | 08:44 PM
#3
Thread Starter
Teching In
Joined: Jun 2017
Posts: 22
Likes: 0
I imagine the spider gears it will not move under power at all, it’s completely locked up (abs) light came on when she went. I have not pulled the cover off yet but will at some point this week. I’m looking for a (posi) what do you recommend? I am also considering either 4.10 or 4.56 gears. It had 3.73s from the factory
Dec 19, 2018 | 03:10 AM
#6
TECH Addict
iTrader: (7)
Joined: Feb 2013
Posts: 2,985
Likes: 372
From: Somewhere north of 285, south of 985.
14bolt is overkill.
jweb ran stock axles deep into 10’s with a posi unit/gears.
The 10bolt is fine like FFDP said you just need a good posi like a trutrac or Eaton.
jweb ran stock axles deep into 10’s with a posi unit/gears.
The 10bolt is fine like FFDP said you just need a good posi like a trutrac or Eaton.
Trending Topics
Dec 19, 2018 | 07:41 AM
#9
100% Redneck
Joined: Mar 2005
Posts: 2,098
Likes: 1,344
From: MAGA COUNTRY
Yukon Gear Calculator
