I am think of adding a Maggie to my setup and I can't really find any info on this stock like set up I have a 02 RCSB 5.3L with full bolton's and I am trying to find out about how much power to expect and what 1/4mi times to shoot for?

Read Sig for mod list.




.

 

this is a job for blownchevy, he has more info on this then any one.

 

I would say about 400rwhp and low 13's/high 12's.

I ran 13.7 in a heavy ecsb with 2.0 60's at about 98mph.

 

With your setup you should be able to go for mid to low 12's if you run a small pulley and get it tuned in well. You'll want to have the converter re-stalled though.

 

I Say High 11's With A Few More Little Mods.....

Trever1t Runs A Low Low 12 And Hes Ext Cab....meth & A Small 50 Shot Of N20

So I Think A Low Low Low 12 Or High 11 Is A Decent Guess!

 

Id say high 12's low 13's with low boost

 

Also, like Zippy mentioned you will want to change that stall out. It's way too much for a maggie. A stock stall is actually fine for it.

 

I love my current stall!

I was afraid of that being an issue, what do you think I will need to lower it to?




.

 

With your setup, that should be good for low 13's- high 12's with out a problem, if you can hook it up..

John

 

probably closer to 2500