PerformanceTrucks.net Forums

FORCED INDUCTION Turbos | Superchargers | Intercoolers | H2O/Meth Injection
Sponsored by:
Sponsored by:

90mm TB upgrade installed... have codes...

Thread Tools
 
Search this Thread
 
Old Jul 14, 2006 | 05:09 PM
  #1  
Bill Reid's Avatar
Bill Reid
Thread Starter
Moderator
iTrader: (14)
 
Joined: Mar 2003
Posts: 2,327
Likes: 1
From: Chandler, AZ
Default 90mm TB upgrade installed... have codes...
P1125C
P2120C
P2125C

Truck goes into "Reduced Engine Power" as soon as you go WOT... and these 3 codes pop up.

I have HP Tuners.. can someone lend a hand?

Bill
Reply
0
Old Jul 14, 2006 | 05:18 PM
  #2  
moregrip's Avatar
moregrip
what a rush!
20 Year Member
Loved
Liked
Community Favorite
iTrader: (8)
 
Joined: Feb 2004
Posts: 17,629
Likes: 33
From: Wyoming
Default
Originally Posted by billreid1@***.net
P1125C
P2120C
P2125C

Truck goes into "Reduced Engine Power" as soon as you go WOT... and these 3 codes pop up.

I have HP Tuners.. can someone lend a hand?

Bill
you got the TAC module correct?
Reply
0
Old Jul 14, 2006 | 05:22 PM
  #3  
Bill Reid's Avatar
Bill Reid
Thread Starter
Moderator
iTrader: (14)
 
Joined: Mar 2003
Posts: 2,327
Likes: 1
From: Chandler, AZ
Default
Its the one Richard sent with the whole kit... GM part#12574221
Reply
0
Old Jul 14, 2006 | 05:25 PM
  #4  
moregrip's Avatar
moregrip
what a rush!
20 Year Member
Loved
Liked
Community Favorite
iTrader: (8)
 
Joined: Feb 2004
Posts: 17,629
Likes: 33
From: Wyoming
Default
Originally Posted by billreid1@***.net
Its the one Richard sent with the whole kit... GM part#12574221
might try BC, he has the most experience installing these conversion kits
Reply
0
Old Jul 14, 2006 | 05:26 PM
  #5  
Bill Reid's Avatar
Bill Reid
Thread Starter
Moderator
iTrader: (14)
 
Joined: Mar 2003
Posts: 2,327
Likes: 1
From: Chandler, AZ
Default
Blown Chevy, HELP!!!
Reply
0
Old Jul 14, 2006 | 06:07 PM
  #6  
BlownChevy's Avatar
BlownChevy
blownerator
25 Year Member
iTrader: (20)
 
Joined: Mar 1986
Posts: 18,748
Likes: 7
From: Chatsworth, CA
Default
I hate to say it, I know it was mentioned a while back.....the 06 may have an issue with this mod....I know blown364 did one and it was a no go, i repeat....no go.
Reply
0
Old Jul 14, 2006 | 06:09 PM
  #7  
Bill Reid's Avatar
Bill Reid
Thread Starter
Moderator
iTrader: (14)
 
Joined: Mar 2003
Posts: 2,327
Likes: 1
From: Chandler, AZ
Default
DOH! ... off it comes. SO, Do I wait for a fix or do I sell it and put the pennies in the piggybank for the 122?
Reply
0

Trending Topics

Old Jul 14, 2006 | 06:13 PM
  #8  
BlownChevy's Avatar
BlownChevy
blownerator
25 Year Member
iTrader: (20)
 
Joined: Mar 1986
Posts: 18,748
Likes: 7
From: Chatsworth, CA
Default
Originally Posted by billreid1@***.net
DOH! ... off it comes. SO, Do I wait for a fix or do I sell it and put the pennies in the piggybank for the 122?

you will need the 90mm for the 122.....I would hold onto your parts (glad you still have the stock ones) and wait for an update. Blown364 may chime in, he might already know how to fix it.
Reply
0
Old Jul 14, 2006 | 06:25 PM
  #9  
Bill Reid's Avatar
Bill Reid
Thread Starter
Moderator
iTrader: (14)
 
Joined: Mar 2003
Posts: 2,327
Likes: 1
From: Chandler, AZ
Default
Good plan BC

Blown364... a PM is on the way

BlownChevy, Thank You, Sir! ...
Reply
0
Old Jul 14, 2006 | 06:28 PM
  #10  
BlownChevy's Avatar
BlownChevy
blownerator
25 Year Member
iTrader: (20)
 
Joined: Mar 1986
Posts: 18,748
Likes: 7
From: Chatsworth, CA
Default
Originally Posted by billreid1@***.net
Good plan BC

Blown364... a PM is on the way

BlownChevy, Thank You, Sir! ...

sorry for the bad news....I am sure it will get worked out.
Reply
0



Advanced Search

All times are GMT -5. The time now is 06:12 PM.