609hp/649tq @ wheels High Counry 4x4
May 19, 2017 | 08:06 AM
#1
Thread Starter
Staging Lane
Joined: Sep 2015
Posts: 53
Likes: 1
609hp/649tq @ wheels High Counry 4x4
2014 High Country 4x4, 6.2, TVS 2300 @ 8psi, 227/231 116LSA cam, CNC heads, headers and now Methanol Injection. End result is 609hp/649tq at the rear wheels Launching in 4 wheel drive still gets a little sketchy...wiith the meth alone picked up right at 50hp and 50tq at the rear wheels....you can see the before and after pulls...yellow is before and blue is current
Trending Topics
May 19, 2017 | 02:42 PM
#8
Thread Starter
Staging Lane
Joined: Sep 2015
Posts: 53
Likes: 1
I am going straight to TSP Longtube Headers, No Cat and then either dumped out of the Elec Exhaust Cut-out or run through the stock exhaust..... I wanted a sleeper, and it sure as hell has turned into one...
May 19, 2017 | 02:58 PM
#9
Thread Starter
Staging Lane
Joined: Sep 2015
Posts: 53
Likes: 1
Reliability....I built this truck so it can go on a cross country trip with no problem ( Im not going to, but its nice to know I could if I wanted), hood rat activities and track fun...lol. I also made it to where any person could hope in it and take off. .Just have to watch for the "LOW METHANOL" ALARM SYSTEM AND GAUGE. Hell, in 4wheel drive, i rip all 4 tires loose and they are 305's all the way around... HAMMER PERFORMANCE out of Sunland Park New Mexico, just minutes west from El Paso, Texas. Check out their Facebook page. They are not only really good guys, but take each build very personal. I could not ask for anything better in a performance shop. If your in the area or not, consider sending your vehicle to Hammer Performance. I stated w/ a TVS2300. Then added Headers w/ Elc, exhaust cutout. After that I went with CNC Heads, 227/231 116SLA Cam Shaft, AEM Air Intake, and then finally pulled the trigger on the Snow Performance Stage 3 Methanol Kit. Also added an "Ice- Box" where the spare battery would go, to help cool the intercooler even more.