4" V-Band Clamps? Where to find?

Reply Subscribe

Thread Tools

Search this Thread

Oct 10, 2010 | 06:50 PM

#11

03ssilverado

Launching!

iTrader: (4)

Joined: Aug 2008

Posts: 213

Likes: 0

From: On a one way dead end street... And I can't get out

I have 2 Walker maga clamp 4 inch butt joint clamps part number 33 280 stainless, NIB. I ship them to you for say 30 bucks shipped?. let me know

Check them out at Walker mega clamps.com

Oct 10, 2010 | 07:19 PM

#12

1989k1500

TECH Fanatic

iTrader: (23)

Joined: May 2006

Posts: 1,858

Likes: 0

From: Ravenna, MI

Quote:

Originally Posted by tarinitup

I did notice that the lips on the two rings were thinner than the other v-bands Nelson used. It's done good for me so far though.

The ones I have wouldnt fit over the pipe. The 3" ones or the 4" one.

Other than that they have been ok.

Oct 10, 2010 | 07:56 PM

#13

Daryn

Formerly darynC-10/23/10

iTrader: (19)

Joined: Aug 2006

Posts: 2,300

Likes: 1

From: gonzales louisiana

Quote:

Originally Posted by 1989k1500

The ones I have wouldnt fit over the pipe. The 3" ones or the 4" one.

Other than that they have been ok.

have you tried takin a carbide bit to the inside of it? usually ill bevel the inside so the pipe fits in there . then i will press the pipe into the v band with a shop press. that way its already a hella tight fit before i even tig weld it