augiedog77

iTrader: (3)

I just finished installing the on3 kit on a 2013 z71 ext cab, the up pipe from the left side won't clear the strut perch without massaging the pipe flat & cutting out a section of the strut perch ( 3/4 by 3/4" square chunk)..

the crossover pipe also had to be massaged flat to clear the right side frame/diff mount.. swaybar was hitting on the crossover pipe, still have to resolve this..

So.cal Wrk Sled

I ended up heating up cross over on header and putting small dent to clear strut tower and then ended up cutting pipe and rotating alittle and as far as cross over pipe hitting sway bar I made,aluminum 3/4 in spacers between frame and sb mounts. Get it done! :-)

Daniel-lsx

Can you snap some pictures of how it looks if you don't mind, I'm trying to do my on 3on my nnbs but I have no idea how to rerun the cross over.thanks.

So.cal Wrk Sled

Im on Vacation rt now but ill get you some pics when I return.

So.cal Wrk Sled

Heres a pic.

Daniel-lsx

Thanks,do you have of the cross over pipe? I still trying to figure it out

Daniel-lsx

You think you can shot some pictures of the entire set up I been researching land no pictures I have found, still can get the cross over pipe to fit,thanks.

mdwatts11

iTrader: (4)

On3 is coming out with an nnbs kit in a few weeks if you can wait.

Daniel-lsx

Really! I purchase my kit like a month ago and on 3 didn't tell me nothing about them workin on the nnbs kit

bigpimpdx

Yup, saw that a few weeks ago and am going to wait