Hope this would be in the right section if not mods feel free to move. I have yet to run my truck since i swaped to a 6L. Anyone have a rough idea of what i should run. I know temperature and other things factor into it. I plan on going this fall/winter when it cools off. Here is the specs on the truck.

LQ9, Comp 228R cam, stock 317 heads, longtube headers, 3200 stall, 3.42 gears, e-fans. I do have drag slicks that hook up decent.

 

Rcsb 2wd also

 

not sure on the chevy but i have a buddy with a 00 rcsb gmc 6.0 stock, built 4L80E, 3200+ stall and i think 3.73 gears and it ran 8.40s. another local guy with similar mods as above with a 76mm TRMT cut 1.7 60s and went 7.7s and 12.4s. it comes down to how you get it to hook. since your in SC you should go to the HOUSE OF HOOk and run

 

It is tuned?

If well tuned you should easily be mid 13s.

 

12.9s with a 1.7 60'

 

My guess would be mid/low 13's..The gears are gonna kill it really...

Really??

 

Blackbear tuned.

 

It amazes me how rude everyone on this site is. Thanks for the answer. I am sure you will be in solid 13s. I don't forsee a 12 in your future.

 

+1 I think you could expect mid 13's.

 

Thanks guys for all the input. I was shooting for at least mid 13's. The only changes i might make in the future is gears or heads. The ol'e G80 hasnt given me any problems yet but i feel sure it will at some point. Not sure what i would go with but no less than 3.73.