Drag Racing Fastest Truck List inside, sortable for any make/model/engine listed.
TIME SLIP DATABASE

Atomic vs Sprayedenali

Thread Tools
 
Search this Thread
 
Old May 10, 2012 | 10:40 PM
  #1  
Atomic's Avatar
Thread Starter
I have a gauge for that
15 Year Member
Loved
Liked
Community Favorite
iTrader: (42)
 
Joined: Jan 2006
Posts: 16,282
Likes: 438
From: Huntsville, AL
Default Atomic vs Sprayedenali

Lot of fun tonight...I really pushed my truck and its pretty maxed out. Injectors are about 92% with meth spraying with 50% e85 in the tank. 15psi down most of the track with a spike to 18psi at the end. Timing is roughly 11 degrees, but the intake temps go from 90 to 150 by the end of the 1/8 with meth. My best run was actually a little later at 13psi. Mitch's truck is nasty up top. I went from 10 to 14.5psi between runs.

My best run:

reaction: 0.744
60ft: 1.541
594ft: 6.374
1/8et: 6.827
1/8mph: 99.55

My goals for the night were 1.6s for 60ft and in the 6s for total et. Trapping 100 would be nice but ill say I pretty much exceeded my goals. HP estimators put my truck around 750hp to the ground and a mid 10 sec 1/4 mile. My 0-60 on the last run leaving at 13psi was 2.938 seconds, which felt awesome!

For me, the next step is getting a better intercooler, and maybe a better intake (currently using the stock truck one).

Turbo silverados 1/8mile drag race - YouTube

Last edited by Atomic; May 12, 2012 at 11:35 AM.
Reply
Old May 10, 2012 | 10:44 PM
  #2  
2004SSS's Avatar
TECH Addict
iTrader: (25)
 
Joined: Dec 2004
Posts: 2,913
Likes: 0
From: southern california
Default

aweomse times man , thats pretty wuick for getting that project done .
Reply
Old May 10, 2012 | 10:45 PM
  #3  
CC05's Avatar
TECH Resident
iTrader: (2)
 
Joined: Sep 2011
Posts: 878
Likes: 1
From: 912, GA
Default

Both of the trucks look like they're running strong. I'd like to see you two run them both in the 1/4 mile. I know a lot of work went into building the truck up to this point. Nice build.
Reply
Old May 10, 2012 | 10:46 PM
  #4  
ak2007r6's Avatar
TECH Veteran
iTrader: (1)
 
Joined: Aug 2011
Posts: 4,104
Likes: 0
From: Alaska
Default

damn that's an impressive 0-60

Nice times
Reply
Old May 10, 2012 | 10:47 PM
  #5  
sprayedenali's Avatar
TECH Fanatic
iTrader: (11)
 
Joined: Dec 2009
Posts: 1,573
Likes: 0
From: Birmingham, AL
Default

fun night!! im very impressed with your truck to say he least!!!! i just need some more time to dial it in and i might be right there with you on my measly 10 psi.....




200kpa is 10psi right.....?
Reply
Old May 10, 2012 | 10:50 PM
  #6  
2004SSS's Avatar
TECH Addict
iTrader: (25)
 
Joined: Dec 2004
Posts: 2,913
Likes: 0
From: southern california
Default

200 kps is almost 14 , 105=0 , +95 kpa=13.78
Reply
Old May 10, 2012 | 10:54 PM
  #7  
sprayedenali's Avatar
TECH Fanatic
iTrader: (11)
 
Joined: Dec 2009
Posts: 1,573
Likes: 0
From: Birmingham, AL
Default

i know..............

i was telling richard i was on 10 until he saw my log! bastard! gota mess with the numbers a little bit
Reply
Old May 10, 2012 | 11:42 PM
  #8  
Atomic's Avatar
Thread Starter
I have a gauge for that
15 Year Member
Loved
Liked
Community Favorite
iTrader: (42)
 
Joined: Jan 2006
Posts: 16,282
Likes: 438
From: Huntsville, AL
Default

Haha that was funny, we were both full of crap

My turbo is out of steam at 15psi....
Reply
Old May 10, 2012 | 11:42 PM
  #9  
pewterliftedz's Avatar
TECH Fanatic
iTrader: (4)
 
Joined: Nov 2008
Posts: 1,691
Likes: 0
From: Houston
Default

trucks running real good rich. keep it up..
Reply
Old May 11, 2012 | 12:14 AM
  #10  
smokeshow's Avatar
Mod with training wheels
iTrader: (16)
 
Joined: Feb 2009
Posts: 7,741
Likes: 207
From: Detroit
Default

We all know you cranked it to 30, Mitch....can't bullshit a bullshitter!
Reply



All times are GMT -5. The time now is 07:32 PM.