Drag Racing Fastest Truck List inside, sortable for any make/model/engine listed.
TIME SLIP DATABASE

13's, bitches!

Old Nov 17, 2006 | 08:51 PM
  #1  
Whippled 496's Avatar
Thread Starter
TECH Addict
15 Year Member
iTrader: (4)
 
Joined: Jan 2006
Posts: 2,143
Likes: 1
From: Lake Shore, MD
Default 13's, bitches!

Finally, after all this time and effort, i got my 13's. Was a great night for draggin too. I think its got a little left in her. This is full weight.....step bars, back seat, spare tire, tailgate.....just like she would be on the street. Remove that stuff and a 13.8X maybe a 13.79. It was very consistant tonight with all my runs within 1 tenth of a second. Intercooler made a huge difference on the top end...i was getting some sucky 60' times (1.98, 1.99, etc) and still pulling off 14.00 E.T.'s. All my runs had me spinnin in 4hi a little, maybe track prep was bad or somethin, not sure. The last run i didnt stall it up as high and it yeilded my best E.T. of 13.94 @ 95mph. I would like my 13 second truck club badge now please.....


Last edited by Whippled 496; Nov 17, 2006 at 09:13 PM.
Reply
Old Nov 17, 2006 | 09:10 PM
  #2  
Dock Rocker's Avatar
12 Second Truck Club
 
Joined: Nov 2005
Posts: 1,451
Likes: 0
From: Jackson, MS
Default

Congratulations!!! if anyone on the site deserves it it is you. I have watched your whole saga unfold great to see you get it right!
Reply
Old Nov 17, 2006 | 09:20 PM
  #3  
kbracing96's Avatar
TECH Senior Member
iTrader: (26)
 
Joined: Jul 2004
Posts: 9,485
Likes: 31
From: Oakland, OR
Default

Wow, not bad . Maybe some day you can catch up to my "little 4.8" lol.
Reply
Old Nov 17, 2006 | 09:22 PM
  #4  
TouchOfEvil04's Avatar
TECH Junkie
iTrader: (13)
 
Joined: Apr 2006
Posts: 3,312
Likes: 0
From: Walker
Default

Good job man. Don't get in too much of ahurry on that 13sec badge hehe.I asked for mine a i think a week and a half a go or so....still waiting lol.
Reply
Old Nov 17, 2006 | 09:23 PM
  #5  
Whippled 496's Avatar
Thread Starter
TECH Addict
15 Year Member
iTrader: (4)
 
Joined: Jan 2006
Posts: 2,143
Likes: 1
From: Lake Shore, MD
Default

Originally Posted by kbracing96
Wow, not bad . Maybe some day you can catch up to my "little 4.8" lol.

lmao....try loading 2500lbs of bricks in your truck, then see how it does...
Reply
Old Nov 17, 2006 | 09:25 PM
  #6  
TIM Z's Avatar
11 sec. Truck Mod
iTrader: (12)
 
Joined: Dec 2005
Posts: 9,736
Likes: 4
From: OH IO :(
Default

Originally Posted by Whippled 496
lmao....try loading 2500lbs of bricks in your truck, then see how it does...
Congrats Man!! hows that allie likin the power? any shift kit or other mods to it? it is ONE tuff tranny. BTW, great 60'!!
Reply
Old Nov 17, 2006 | 09:32 PM
  #7  
Whippled 496's Avatar
Thread Starter
TECH Addict
15 Year Member
iTrader: (4)
 
Joined: Jan 2006
Posts: 2,143
Likes: 1
From: Lake Shore, MD
Default

Originally Posted by TIM Z
Congrats Man!! hows that allie likin the power? any shift kit or other mods to it? it is ONE tuff tranny. BTW, great 60'!!
Thanks guys! Yea, not bad for a 7000lb+ truck. Allison is rock solid, no problems so far and is still stock other than a few programming changes. She should hold with no problems with the power i have going through it. Concensus is about 720lb/ft of engine torque is about the cut off for the stock Allison. Course everyone has a different opinion, but so far its doing great!
Reply
Old Nov 17, 2006 | 09:40 PM
  #8  
kbracing96's Avatar
TECH Senior Member
iTrader: (26)
 
Joined: Jul 2004
Posts: 9,485
Likes: 31
From: Oakland, OR
Default

Originally Posted by Whippled 496
lmao....try loading 2500lbs of bricks in your truck, then see how it does...
WOW, your truck weighs 8000lbs??? (mine is 5500)

OK, I'll put 2500lbs in it, if you will pull 3 spark plug wires off
Reply
Old Nov 17, 2006 | 09:42 PM
  #9  
TIM Z's Avatar
11 sec. Truck Mod
iTrader: (12)
 
Joined: Dec 2005
Posts: 9,736
Likes: 4
From: OH IO :(
Default

Originally Posted by Whippled 496
Thanks guys! Yea, not bad for a 7000lb+ truck. Allison is rock solid, no problems so far and is still stock other than a few programming changes. She should hold with no problems with the power i have going through it. Concensus is about 720lb/ft of engine torque is about the cut off for the stock Allison. Course everyone has a different opinion, but so far its doing great!
Wow, i have close to 800 ftlbs going to the rear and my Allie is hangin tough! I think i might do a transgo Jr kit if i get a more powerful tuner for some insurance. This tranny is WAY better than ANY 60/80E !!
Reply
Old Nov 17, 2006 | 09:46 PM
  #10  
Whippled 496's Avatar
Thread Starter
TECH Addict
15 Year Member
iTrader: (4)
 
Joined: Jan 2006
Posts: 2,143
Likes: 1
From: Lake Shore, MD
Default

Originally Posted by TIM Z
Wow, i have close to 800 ftlbs going to the rear and my Allie is hangin tough! I think i might do a transgo Jr kit if i get a more powerful tuner for some insurance. This tranny is WAY better than ANY 60/80E !!
Wow! 800 to the rear wheels? that thing must launch pretty hard.

Originally Posted by kbracing96
WOW, your truck weighs 8000lbs??? (mine is 5500)

OK, I'll put 2500lbs in it, if you will pull 3 spark plug wires off
nah, its about 7200lbs, just a little fella...
Reply

Thread Tools
Search this Thread

All times are GMT -5. The time now is 03:22 AM.