1/8 went with only 1 and 2 gear lost third only stalled 1500 rpms and coasted 40 or 50 feet across 60' 1.86 330 5.377 mph 64.70 1/8 8.308 mph 84.09 what kind of 1/4 passes to expect

 

Real shitty 1/4 time if you don't have a 3rd gear. But, if you did have 3rd, 12.8 give or take a tenth.

 

If you had 3rd, high 12's would be no problem.

 

yeah i was talking about with a good tranny and turning shift points from 5900 rpms to 6200 or 6300 rpms i have a 3000 stall would it help to stall it up or go around 1800 so it will flash the stall

 

what all do you have on the truck? rc ec? just want to know.

 

So you ran an 1/8th@83.0mph.....stalled it to 1500 rpm but what do you mean "lost 3rd"? and "coasted 40' or 50' across the 60'?

 

I think he meant that he coasted 40' - 50' across the 1/8 mile...

 

yeah thats what i meant i didnt make myself clear when i left the line i stalled it to about 1500 run perfect through 1 and 2 gear went to go into third and there was nothing there just slmmed rev limiter and and let out of it and it may have not been that far just estimating somewhere around 40' give or take