Harlan Sharp Aluminum Roller Rockers
#1
Thread Starter
formerly Moze (2/24/2012)
iTrader: (22)
Joined: Apr 2006
Posts: 490
Likes: 0
From: Mesquite, TX
- SOLD -
Going turbo and need the cash from these more than I need the rockers themselves. I really, really, REALLY don't want to sell these. But I want a turbo.

The rockers have pretty low mileage - I would estimate it at 5,000. There are a couple of very minor nicks but nothing that would come close to affecting their integrity or performance. I'm unsure if these are 1.7 or 1.8 rockers, sorry.

Photos:




Anyway, these list for $399 on Summit. I will let them go for $325 shipped.
Small incentive, but I'll throw in one of my Hemi shirts at no charge (size XL only, sorry!):

I have one stipulation...the parts I'm selling are funding my turbo build. I should have the turbo installed within a week or so. This is approximate. I will not be able to ship the rockers until the install is complete. Ask around though, I ship promptly, I pack the items well, and have perfect feedback on the various forums and on eBay (member name is sabersfury if you want to check).
Last edited by DamnYankee; May 23, 2008 at 06:59 PM.
#4
Thread Starter
formerly Moze (2/24/2012)
iTrader: (22)
Joined: Apr 2006
Posts: 490
Likes: 0
From: Mesquite, TX
I used to be able to sell the shirts on here but they got complaints. Definitely a difference. My tuner was picking up knock and just to see, we switched from the rollers back to the stockers, but it wasn't the problem. But when I went back to the stockers, yeah, I felt a difference immediately.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
KINGCYCLES
GM Parts Classifieds
1
Oct 2, 2015 10:21 AM






