I am going to be pulling my slightly ported and fully hand polished 5.3(#706) heads off of my truck this weekend, I did some minor porting/mainly smoothing the rough edges and enlarging the runners, and then I went back and polished them.so they should flow alittle better than stock, or you could have some ls1 size valves put in them for cheap, and they'd flow even better. $100 plus shipping(firm) unless your real close to GA is gonna be about $50 or so.

I'll also have a used set of comp cam 918(the revised ones) with 2k miles on them $125 shipped and a hardened set of 7.4 manley pushrods with about 10k on them $55 shipped.

If your interested in anything let me know.

 

hey im interested in the comp 918's and pushrods. PM me a price together shipped to 48126. thanks

cory

 

PM sent!

 

how much were the heads milled? thanks

 

They haven't been milled, to my knowledge. I just guessed 62cc as the stock size.

 

PMed ya.

 

springs pending sale to coryhussey

 

pushrods SOLD!!

heads -still up for grabs
springs-pending sale

 

springs and heads still for sale, haven't heard anything else on the springs so they are back up for grabs.

 

bump!