Welp the joys of buying things used has poked its head out. Both my turbos are blowing oil out the intake and exhaust housing. Im pretty sure the seals are blown out or worn. I need to have them rebuilt i talked to majestic and honestly they must be extremely proud of their work because they want 400 a piece to rebuild them. Any recommendations would be helpful thanks. Im starting to miss my magnacharger lol

 

ahhh man, sorry to hear about this.... you should mount up a posse to find the *** that sold you these in the first place.

i have a recomendation... TVS FTW

hope you get it worked out bro

 

eh not a big deal i found rebuild kits petroleum really wears on rubber and stuff
im gonna rebuild them myself

 

Sure you dont need a restrictor or anything first?

 

I should do a write up on this. Its rather easy. One thing to be certain of befor you tear it down is to take a paint pen or sharpy and mark the jam nut shaft and compressor impeller with each other. (thanks rick :thumbs: ) That way you can line it back up and dont have to get it rebalanced Other than that its basic mechanics.

 

there was a guy on ebay selling staggered gap rings that seal the oil really well, and you don't have to gap them.

 

So you gonna rebuild them or buy new ones?

 

jason turbonetics are junk...every one i have seen running in the past year has failed...get you 2 mpt70's and be done with it...