PerformanceTrucks.net Forums
15 ft lbs, 85 degrees, royal purple max tuff assembly lube on the bearings, 10w30 on the cylinders and rings, arp ultra torque on all bolts / studs
15 ft lbs, 85 degrees, royal purple max tuff assembly lube on the bearings, 10w30 on the cylinders and rings, arp ultra torque on all bolts / studs
0 2016/03/11 12:35:37
Pistons ringed up
Pistons ringed up
0 2016/03/11 11:07:02
Cylinders oiled up
Cylinders oiled up
0 2016/03/11 11:06:08
No pictures of it all lubed up but heres my handy dandy tourque angle gauge i pucked up for 25 bucks.
No pictures of it all lubed up but heres my handy dandy tourque angle gauge i pucked up for 25 bucks.
0 2016/03/10 18:00:05
Main clearances, self explanatory
Main clearances, self explanatory
0 2016/03/10 17:58:52
Crank in dry, plastigage in all the caps.
Crank in dry, plastigage in all the caps.
0 2016/03/10 17:57:46
Bearings in
Bearings in
0 2016/03/10 17:56:44
Cleaning cosmoline off the block
Cleaning cosmoline off the block
0 2016/03/10 17:55:50
Heads, rods, pistons, crank back from the machine shop. Transmission cooler showed up no pictures of that. So I have everything i need to put it together, just need to verify torque specs, go buy some plastigage and we will get this party started
Heads, rods, pistons, crank back from the machine shop. Transmission cooler showed up no pictures of that. So I have everything i need to put it together, just need to verify torque specs, go buy some plastigage and we will get this party started
0 2016/03/08 13:23:26
0 2016/03/05 11:35:10
30 pound ev1 4 hole injectors from ford, rebuilt and flow matched to within 1 percent Will stick them on my intake and see if the fuel rails work this weekend. Not looking promising just from eyeballing it.
30 pound ev1 4 hole injectors from ford, rebuilt and flow matched to within 1 percent Will stick them on my intake and see if the fuel rails work this weekend. Not looking promising just from eyeballing it.
0 2016/03/02 16:24:40
Speak of the devil, showed up a day early, worked out good l, was off today for dentist appointment so was able to get my valve seals over to him. Hopefully ill be putting this mouse together next weekend. Think ive got everything except maybe an aftermarket fuel rail, not sure the truck rail is going to work with my new injectors, and some an braided hose and fittings.
Speak of the devil, showed up a day early, worked out good l, was off today for dentist appointment so was able to get my valve seals over to him. Hopefully ill be putting this mouse together next weekend. Think ive got everything except maybe an aftermarket fuel rail, not sure the truck rail is going to work with my new injectors, and some an braided hose and fittings.
0 2016/03/01 13:09:45
Adapter plate for sanden compressor to hook up to my old r4 lines because im way to lazy to hunt down a shop to make me new lines and this is probably cheaper anyways for 80 bucks
Adapter plate for sanden compressor to hook up to my old r4 lines because im way to lazy to hunt down a shop to make me new lines and this is probably cheaper anyways for 80 bucks
0 2016/03/01 12:06:36
Ditching the old pancake r4 compressor for this new sanden 508 7 piston job, hopefully i can hang meat in the cab when its running
Ditching the old pancake r4 compressor for this new sanden 508 7 piston job, hopefully i can hang meat in the cab when its running
0 2016/03/01 12:05:36
And the budget went out the window, wanted to keep the ac, half the fun of doing an ls swap is to show off the engine bay, stock brackets are ugly so i splurged in dirty dingo alternator, power steering ac compressor brackets
And the budget went out the window, wanted to keep the ac, half the fun of doing an ls swap is to show off the engine bay, stock brackets are ugly so i splurged in dirty dingo alternator, power steering ac compressor brackets
0 2016/03/01 12:01:25
0 2016/03/01 12:00:56
0 2016/03/01 12:00:36
0 2016/03/01 12:00:16
0 2016/03/01 11:58:06
0 2016/03/01 11:57:47
0 2016/03/01 11:57:29
This is where i went over budget, not a need but i wanted to keep the ac so i went ahead and bought the whole bracket set from them so it didnt look ghetto
This is where i went over budget, not a need but i wanted to keep the ac so i went ahead and bought the whole bracket set from them so it didnt look ghetto
0 2016/03/01 11:55:29
Headers, assembly lube, head studs, new starter, oil restrictor couple things im probably forgetting
Headers, assembly lube, head studs, new starter, oil restrictor couple things im probably forgetting
0 2016/03/01 11:53:54
0 2016/02/28 15:58:47
0 2016/02/28 15:58:27
0 2016/02/28 14:05:02
Ev1 injector plugs
Ev1 injector plugs
0 2016/02/27 17:19:11
Someone please tell me what injector plug this is so i can order new injectors
Someone please tell me what injector plug this is so i can order new injectors
0 2016/02/24 16:46:08
Regulator with boost reference for future upgrades
Regulator with boost reference for future upgrades
0 2016/02/24 16:44:57
More parts
More parts
0 2016/02/24 16:44:19
Terrible picture but i spent 4 hours sunday cleaning all my covers, havent decided but i think i might try to polish them all up
Terrible picture but i spent 4 hours sunday cleaning all my covers, havent decided but i think i might try to polish them all up
0 2016/02/23 11:37:05
All settled in and feeling right at home. I love a brand new block
All settled in and feeling right at home. I love a brand new block
0 2016/02/23 11:33:39
Shes so pretty
Shes so pretty
0 2016/02/23 11:30:34
Omg its like Christmas all over again
Omg its like Christmas all over again
0 2016/02/23 11:29:30
250 pounds, inspect for damage before accepting
250 pounds, inspect for damage before accepting
0 2016/02/23 11:28:09
Shit just got real
Shit just got real
0 2016/02/23 11:27:18
0 2016/02/23 11:26:03
Hmm
Hmm
0 2016/02/23 11:25:31
Thats a interesting box wonder what it could be.
Thats a interesting box wonder what it could be.
0 2016/02/23 11:24:51
Whats this? Shit just got real
Whats this? Shit just got real
0 2016/02/23 11:24:11