PerformanceTrucks.net Forums
This is the relaythe top wire comes from the battery tray fuse block, lower goes to starter solenoid....
This is the relaythe top wire comes from the battery tray fuse block, lower goes to starter solenoid....
0 2016/05/08 17:46:39
The top wire is the one fron the ride side of the fuse block i just cant figure out where the hell it connects to.....
The top wire is the one fron the ride side of the fuse block i just cant figure out where the hell it connects to.....
0 2016/05/08 17:46:07
This is fuse block on the battery tray the two wires on left go to the battery and the orange to the relay....the one on the right goes to the fuse box across the firewall
This is fuse block on the battery tray the two wires on left go to the battery and the orange to the relay....the one on the right goes to the fuse box across the firewall
0 2016/05/08 17:44:42
0 2016/05/08 17:40:18
0 2016/05/08 16:40:03
0 2016/05/07 19:20:02
Unbolt the cam gear.... And wiggle it off the cam, you are going to need a heat gun or really hot hair dyer to heat the tnesioner up and make it pliable so you can compress it and put a pin or small allen key in it to keep it compressed....
Unbolt the cam gear.... And wiggle it off the cam, you are going to need a heat gun or really hot hair dyer to heat the tnesioner up and make it pliable so you can compress it and put a pin or small allen key in it to keep it compressed....
0 2016/05/07 13:39:44
Like this....
Like this....
0 2016/05/07 10:46:55
0 2016/05/04 17:45:27
0 2016/05/04 17:45:18
0 2016/05/04 17:45:13
0 2016/05/04 17:45:08
0 2016/05/04 17:45:03
Cam bearings look like shi....
Cam bearings look like shi....
0 2016/05/04 17:44:56
0 2016/05/04 17:44:43
Somebody didnt like to change their oil....
Somebody didnt like to change their oil....
0 2016/05/04 17:44:33
0 2016/05/04 17:44:17
0 2016/05/04 17:44:06
My $100 brand new afr setup came in today.....
My $100 brand new afr setup came in today.....
0 2016/05/03 17:56:29
Got the l92 today..everything from intake to oil pan, but had to send the oil pan back on the core it had the oil level sensor innit anyway so not a big deal.... Now to decide which is going in!!! The l92 bored probably .010 or .020 over to clean up the piston slap or the l96..... Decisions decisions!!!
Got the l92 today..everything from intake to oil pan, but had to send the oil pan back on the core it had the oil level sensor innit anyway so not a big deal.... Now to decide which is going in!!! The l92 bored probably .010 or .020 over to clean up the piston slap or the l96..... Decisions decisions!!!
0 2016/04/28 18:02:17
0 2016/04/28 12:54:34
Something like this.... Maybe not black though!!!
Something like this.... Maybe not black though!!!
0 2016/04/25 10:03:37
This prompted me to flip the sway bar
This prompted me to flip the sway bar
0 2016/04/24 16:26:22
0 2016/04/24 16:23:51
0 2016/04/24 16:23:46
Vvt on left non vvt on right
Vvt on left non vvt on right
0 2016/04/24 01:39:17
0 2016/04/23 19:12:43
It looks more like a tie rod jam nut than an o2 sensor bung
It looks more like a tie rod jam nut than an o2 sensor bung
0 2016/04/23 19:12:39
0 2016/04/12 22:08:54
Pos slipping ass mad dog out!!!
Pos slipping ass mad dog out!!!
0 2016/04/12 20:54:53
New trans goin in....
New trans goin in....
0 2016/04/12 20:54:51
0 2016/04/12 20:54:46
0 2016/04/12 20:54:44
0 2016/04/12 20:54:39
0 2016/04/12 20:54:35
My h pipe i made....
My h pipe i made....
0 2016/04/12 20:54:32
0 2016/04/12 20:54:28
You can see both in this pic....on the 2wd
You can see both in this pic....on the 2wd
0 2016/04/04 15:43:53
This is a 4wd with the rear plug
This is a 4wd with the rear plug
0 2016/04/04 15:43:30
0 2016/03/30 20:23:30