PerformanceTrucks.net Forums
Proposed heat exchanger design.
Proposed heat exchanger design.
0 2017/03/14 15:27:37
Polynomial equation for NTC sensors. Had to use reduced data range to get curve accurate in the anticipated temp range.
Polynomial equation for NTC sensors. Had to use reduced data range to get curve accurate in the anticipated temp range.
0 2017/03/14 10:26:43
Resistors added to harness for voltage divider to read NTC sensors on HPT EIO.
Resistors added to harness for voltage divider to read NTC sensors on HPT EIO.
0 2017/03/14 10:24:25
8mm temp sensors installed in heat exchanger and coolant res
8mm temp sensors installed in heat exchanger and coolant res
0 2017/03/14 10:17:28
3/5 Drop, step bars removed
3/5 Drop, step bars removed
0 2017/01/10 10:31:18
3/5 Drop, step bars removed
3/5 Drop, step bars removed
0 2017/01/10 10:31:08
First round eliminations at LS Fest 2016. Let out trying not to break out.
First round eliminations at LS Fest 2016. Let out trying not to break out.
0 2016/10/20 10:14:16
In staging for True Street at LS Fest 2016
In staging for True Street at LS Fest 2016
0 2016/10/19 08:42:10
New Racestars, 17x4.5 w/M&H 28x4.5 bias fronts and 15x10 w/Hoosier DR 295/65/15
New Racestars, 17x4.5 w/M&H 28x4.5 bias fronts and 15x10 w/Hoosier DR 295/65/15
0 2016/10/19 08:40:04
Stock height after a bath.
Stock height after a bath.
0 2016/10/19 08:22:45
Right after 3/5, hoping front will settle a bit more.
Right after 3/5, hoping front will settle a bit more.
0 2016/10/19 08:21:03
First drive after 3/5 drop.
First drive after 3/5 drop.
0 2016/10/19 08:20:17
Tow pig doing work...
Tow pig doing work...
0 2016/10/19 08:19:07
Racestar 15x10 and 17x4.5
Racestar 15x10 and 17x4.5
0 2016/01/22 18:08:53
Kenne Bell 2.8 with fresh 371 build
Kenne Bell 2.8 with fresh 371 build
0 2015/11/17 19:34:31
Sample layouts for gauge/switch plate in lower cubby of 03-06 center console.
Sample layouts for gauge/switch plate in lower cubby of 03-06 center console.
0 2014/08/07 15:05:39
Adding a non-linear temp sensor thru the EGR port in HPT using an Excel scatter chart and 5th order polynomial equation to create a custom pid.
Adding a non-linear temp sensor thru the EGR port in HPT using an Excel scatter chart and 5th order polynomial equation to create a custom pid.
0 2014/07/29 11:27:19
Hauling the in-law's tractor.
Hauling the in-law's tractor.
0 2013/12/14 09:59:58
Tahoe pulling truck on 20' trailer
Tahoe pulling truck on 20' trailer
0 2013/12/14 09:33:31
20' dovetail trailer the day I picked it up.
20' dovetail trailer the day I picked it up.
0 2013/12/14 09:25:34
Nice close-up of the Kenne Bell 2.8L with 8-rib upgrade and Gates HD belt
Nice close-up of the Kenne Bell 2.8L with 8-rib upgrade and Gates HD belt
0 2013/11/20 19:47:01
After a quick bath...
After a quick bath...
0 2013/11/20 19:36:49
good shot of the new HD front-end
good shot of the new HD front-end
0 2013/11/20 19:36:49
After a quick bath...
After a quick bath...
0 2013/11/20 19:31:50
2013 ls fest throwdown 2000 chevy silverado autocross 6
2013 ls fest throwdown 2000 chevy silverado autocross 6
0 2013/11/20 19:29:52
2013 ls fest throwdown - autocross
2013 ls fest throwdown - autocross
0 2013/11/20 19:28:43
2013 ls fest throwdown
2013 ls fest throwdown
0 2013/11/20 19:27:32
Cruising into a show after installing HD frontend
Cruising into a show after installing HD frontend
0 2012/11/16 17:31:58
Custom built y-pipe for Kooks f-body headers. 3" tubes into 2x3" to 1x4" Flowmaster merge collector.
Custom built y-pipe for Kooks f-body headers. 3" tubes into 2x3" to 1x4" Flowmaster merge collector.
0 2012/06/14 14:33:03
Kooks 1-7/8 to 2" stepped f-body headers installed with custom 3" y-pipe. Notice proximity of #6 primary tube to passenger side frame.
Kooks 1-7/8 to 2" stepped f-body headers installed with custom 3" y-pipe. Notice proximity of #6 primary tube to passenger side frame.
0 2012/06/14 14:33:03
Kooks 1-7/8" to 2" stepped f-body headers vs 6 year old coated Pacesetter truck headers (passenger side)
Kooks 1-7/8" to 2" stepped f-body headers vs 6 year old coated Pacesetter truck headers (passenger side)
0 2012/06/14 14:20:08
Kooks 1-7/8" to 2" stepped f-body headers vs 6 year old coated Pacesetter truck headers (driver side)
Kooks 1-7/8" to 2" stepped f-body headers vs 6 year old coated Pacesetter truck headers (driver side)
0 2012/06/14 14:20:08
2012 03 24 17 12 56 493
2012 03 24 17 12 56 493
0 2012/06/05 18:17:23
Side shot
Side shot
0 2012/06/05 18:11:13
After a quick bath
After a quick bath
0 2012/06/05 18:07:14
0 2012/06/05 18:07:14
4wd with front torsion bar crank, Centerline Stingray 20x8.5, 275/60/20 Cooper LTZ
4wd with front torsion bar crank, Centerline Stingray 20x8.5, 275/60/20 Cooper LTZ
0 2012/06/05 18:07:14
One of my favorite pics.
One of my favorite pics.
0 2012/06/05 16:41:42
Some parking garage action
Some parking garage action
0 2012/06/05 16:41:42
Chillin' at the Beach!
Chillin' at the Beach!
0 2012/06/05 16:41:42