PerformanceTrucks.net Forums
Intermediate clutches
Intermediate clutches
0 2020/11/22 06:34:14
4l80 disassembled
4l80 disassembled
0 2020/11/22 06:34:07
Lots of metal sludge on magnet
Lots of metal sludge on magnet
0 2020/11/15 17:10:14
4L80, lots of clutch material but no metal chunks
4L80, lots of clutch material but no metal chunks
0 2020/11/15 17:09:10
Cracked 4L80 Case
Cracked 4L80 Case
0 2020/11/15 17:08:09
0 2020/11/10 09:50:53
0 2020/11/03 08:08:05
0 2020/11/03 08:08:00
Plenty of clearance fully inflated
Plenty of clearance fully inflated
0 2020/11/03 07:52:04
0 2020/11/03 07:26:32
Bag fully inflated
Bag fully inflated
0 2020/11/03 07:26:30
Airbag located on spring in front of axle (most kits are behind)
Airbag located on spring in front of axle (most kits are behind)
0 2020/11/03 07:26:29
Lower bracket welded to flip kit spring saddle
Lower bracket welded to flip kit spring saddle
0 2020/11/03 07:26:27
GMT800 standard AirLift kit converted to GMT900 flip kit.
GMT800 standard AirLift kit converted to GMT900 flip kit.
0 2020/11/03 07:26:25
Gauge and switch layouts for 3 locations on 03-06 center console.
Gauge and switch layouts for 3 locations on 03-06 center console.
0 2020/05/28 07:13:18
Morimoto mini h1 hid projector retrofit in aftermarket Silverado housings.
Morimoto mini h1 hid projector retrofit in aftermarket Silverado housings.
0 2018/03/20 12:00:50
0 2017/11/20 09:18:54
Hunt Stagefield course 8/13/17
Hunt Stagefield course 8/13/17
0 2017/08/16 09:28:16
Checking tire for treadwear/inflation
Checking tire for treadwear/inflation
0 2017/08/16 09:27:34
Ready for AutoX
Ready for AutoX
0 2017/08/16 09:26:54
Mounting new 30x14x2.5 heat exchanger
Mounting new 30x14x2.5 heat exchanger
0 2017/05/19 20:15:49
Fitting new heat exchanger and plumbing
Fitting new heat exchanger and plumbing
0 2017/05/19 20:13:35
Clearance on bumper cover and headlight bucket for HEX fittings.
Clearance on bumper cover and headlight bucket for HEX fittings.
0 2017/05/19 20:12:45
New pump location, upsized tank fittings and rerouted hoses.
New pump location, upsized tank fittings and rerouted hoses.
0 2017/05/19 20:11:53
Final install.... grill still fits.
Final install.... grill still fits.
0 2017/05/19 20:10:32
Tru-cool Max 40k located behind heat exchanger.
Tru-cool Max 40k located behind heat exchanger.
0 2017/05/10 18:45:24
Fitting new much larger heat exchanger.
Fitting new much larger heat exchanger.
0 2017/05/10 18:44:01
Heat exchanger fitting locations...
Heat exchanger fitting locations...
0 2017/05/10 18:42:16
After 4" spindle/coil over front drop and 6" leaf flip rear. 265/50/18 F and 305/45/18 R tires.
After 4" spindle/coil over front drop and 6" leaf flip rear. 265/50/18 F and 305/45/18 R tires.
0 2017/04/08 09:32:55
305/45/18 on 9.5" wheels with a flip kit (6")
305/45/18 on 9.5" wheels with a flip kit (6")
0 2017/04/08 09:30:53
Final revision on HEX design
Final revision on HEX design
0 2017/03/27 13:32:42
Back of HD grill to open up for better flow thru the large cross bar.
Back of HD grill to open up for better flow thru the large cross bar.
0 2017/03/27 06:27:07
DIY 'FlowTie'?
DIY 'FlowTie'?
0 2017/03/27 06:26:19
Comparison of new HEX design to old setup. 2.55x larger frontal area.
Comparison of new HEX design to old setup. 2.55x larger frontal area.
0 2017/03/27 06:23:39
New HEX design mock-up
New HEX design mock-up
0 2017/03/27 06:22:53
ICT post-boost. Cursor at highest HEX in temp before it starts coming back down.
ICT post-boost. Cursor at highest HEX in temp before it starts coming back down.
0 2017/03/14 18:30:37
ICT hot cruise after 15min stop and go, no boost.
ICT hot cruise after 15min stop and go, no boost.
0 2017/03/14 18:30:36
ICT cold pre-start
ICT cold pre-start
0 2017/03/14 18:30:35
ICT cold cruise
ICT cold cruise
0 2017/03/14 18:30:33
ICT in boost. Cursor in boost region. Pre-boost was apx 15 minute cruise in stop and go.
ICT in boost. Cursor in boost region. Pre-boost was apx 15 minute cruise in stop and go.
0 2017/03/14 18:30:31