PerformanceTrucks.net Forums
Huron Speed Log. Is that smaller pipe sticking out from the front bottom where the waste gate goes? I'm really smart.
Huron Speed Log. Is that smaller pipe sticking out from the front bottom where the waste gate goes? I'm really smart.
0 2018/10/23 08:57:44
74mm Precision Turbo with T4 Flange
74mm Precision Turbo with T4 Flange
0 2018/10/23 08:57:44
First time wrapping manifolds. I think it's good enough. Zip tie will come off after I find something to replace it with
First time wrapping manifolds. I think it's good enough. Zip tie will come off after I find something to replace it with
0 2018/10/24 10:32:09
How I did my bed lift. Not the safest but eh. Also found out the truck only had 4 out of the 8 bed bolts to the frame.
How I did my bed lift. Not the safest but eh. Also found out the truck only had 4 out of the 8 bed bolts to the frame.
0 2018/10/25 08:03:47
This thing was barely held together.
This thing was barely held together.
0 2018/10/25 08:03:48
Looks like another filter broke off and is sitting in the tank with some plastic pieces. Of course truck broke with a full tank of gas :)
Looks like another filter broke off and is sitting in the tank with some plastic pieces. Of course truck broke with a full tank of gas :)
0 2018/10/25 08:03:48
Walbro 450 does this look like a fake?
Walbro 450 does this look like a fake?
0 2018/10/25 08:03:48
Connections on my lid
Connections on my lid
0 2018/10/25 08:09:56
Plug #1
Plug #1
0 2018/10/25 08:09:57
Plug #2
Plug #2
0 2018/10/25 08:09:57
Racetronicx Hotwire Kit I ordered
Racetronicx Hotwire Kit I ordered
0 2018/10/25 08:09:57
Mystery connector coming off the racetronix harness
Mystery connector coming off the racetronix harness
0 2018/10/25 08:09:57
I think if I plug in plug #4 to the walbro and solder the other end of plug #4 to plug #3 and put the other end in the back of the lid it should work? The reason I want to use plug #3 is because it is connected to I assume the fuel level mechanism that is on the bucket.
I think if I plug in plug #4 to the walbro and solder the other end of plug #4 to plug #3 and put the other end in the back of the lid it should work? The reason I want to use plug #3 is because it is connected to I assume the fuel level mechanism that is on the bucket.
0 2018/10/25 08:09:57
0 2018/10/25 08:09:57
How the old pump was hooked together
How the old pump was hooked together
0 2018/10/25 08:09:57
Old fuel pump connector
Old fuel pump connector
0 2018/10/25 08:09:57
Mystery connector on the right, coming off the racetronix harness I have no idea what that would connect to any help?
Mystery connector on the right, coming off the racetronix harness I have no idea what that would connect to any help?
0 2018/10/25 08:09:57
What connectors are on my truck right now
What connectors are on my truck right now
0 2018/10/25 08:10:00
Back of lid
Back of lid
0 2018/10/25 08:10:00
Plug #4
Plug #4
0 2018/10/25 08:10:00
Plug #3
Plug #3
0 2018/10/25 08:10:00
Amazing drawing skills. This is a quick thing I drew to help my understand how this is going to work. Might not make sense to anyone else but me.
Amazing drawing skills. This is a quick thing I drew to help my understand how this is going to work. Might not make sense to anyone else but me.
0 2018/10/25 10:43:09
0 2018/10/29 15:03:43
0 2018/10/29 15:03:43
0 2018/10/29 15:03:44
0 2018/10/29 15:03:44
Front of Flex Plate
Front of Flex Plate
0 2018/10/31 07:49:38
Flex Plate Bolts
Flex Plate Bolts
0 2018/10/31 07:49:38
Old Crank
Old Crank
0 2018/10/31 07:49:38
Old Crank Again
Old Crank Again
0 2018/10/31 07:49:37
New Crank 2
New Crank 2
0 2018/10/31 07:49:38
Back of Flex Plate
Back of Flex Plate
0 2018/10/31 07:49:38
New Crank
New Crank
0 2018/10/31 07:49:38
0 2018/11/12 10:39:27
Finally found the original post of the truck they guy had.
Finally found the original post of the truck they guy had.
0 2018/12/10 08:00:26
Art Skills
Art Skills
0 2018/12/11 10:06:08
0 2019/04/22 07:40:34
Tires came in
Tires came in
0 2019/06/18 14:54:38
0 2020/08/03 14:36:40
0 2020/08/03 14:36:43